1 / 8 Product image 1
Amazon product images. See this listing on Amazon
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
Price on Amazon.com as of 2026-11-01 12:08 UTC, and subject to change.
An infant car seat with one mode: rear-facing infant 4 to 35 lb, up to 32 in.
Opens Amazon.com in a new tab. As an Amazon Associate I earn from qualifying purchases.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
The Baby Jogger city GO 2 is a rear-facing infant car seat. The US manual lists 4 to 30 lb and 32 in or less, with the head at least 1 in below the top of the seat, while the product page says 4 to 35 lb. It installs with a RAPIDLOCK base or without one, and expires 7 years after manufacture.
The city GO 2 suits a family that wants a carrier that clicks into a Baby Jogger stroller and can also be belted in without its base, for example in a taxi. The main caution is that the manual and the product page give different weight maximums (30 lb against 35 lb), so I would follow the label and manual on the seat you buy. The city turn is the brand's other seat: a rotating convertible that Baby Jogger rates rear-facing from 4 to 50 lb and forward-facing from 26.5 to 65 lb.
A research summary of Baby Jogger’s published specifications and manual, read . Not a hands-on test or a crash-safety rating.
This seat covers one stage. Baby Jogger gives it a 7-year life from the date of manufacture, so check the date label before using a hand-me-down.
| Mode | Child weight | Child height | Minimum age | Conditions |
|---|---|---|---|---|
| Rear-facing infant | 4 to 35 lb | Up to 32 in | Not published | Product page figure; see conflicts (manual states 4-30 lb) |
A child must meet every limit for the mode they use. The labels on your seat and its manual are the final word.
Every install is a fit between one seat and one vehicle. Read both manuals, and use a free inspection station if anything is unclear.
At 17.25 in at its widest, this seat is one of the narrower ones in its class and is a candidate for three across in many mid-size cars.
Slate, Harbor Grey, Pike, Frosted Ivory, Lunar Black.
When they differ, follow the manual and the labels on your seat.
The base installs with its push-button LATCH strap or with the vehicle lap and shoulder belt through the blue rear-facing belt path, then the RAPIDLOCK lock-off closes over the belt. The manual allows a center seat with LATCH only if the vehicle manual permits it and the anchors are 11 in or more apart. Without the base, the vehicle belt goes through the blue belt path on the carrier, and if the shoulder belt is long enough it wraps behind the shell through the taxi-safe guide. The carrier should move less than 1 in at the belt path. Never use LATCH and the seat belt together.
The base has 4 recline positions set with a lever and a recline foot. Its bubble indicator has two zones: the clear area is level for infants 4 to 20 lb, and the notched area for children 20 to 30 lb. If the foot is fully raised and the bubble is still outside the zone for your child's weight, the manual allows a tightly rolled towel or pool noodle under the front of the base. Without the base, a red line on the side of the carrier must be level with the ground, and rolled towels may go at the vehicle seat crease. Check the level again with the child in the seat.
The harness height moves with the head support, adjusted from the back of the seat with two buttons, so the straps do not need rethreading. Straps must sit at or just below the shoulders, and the chest clip at armpit level. The body support is only for children under 12 lb and must be used under 6 lb, and only with the harness in the bottom 2 sets of slots. The buckle strap has more than one slot. The handle has 4 positions, any of them allowed in the vehicle, but it must be locked upright before you carry the seat.
The head support pad comes off after undoing snaps on both sides. The seat pad has 4 snaps and 4 plastic flaps at the sides, and the canopy unclips with two fastening strips, side snaps and a release button on each arm. The manual points to the care tag on the seat pad, and says to machine wash the pad and canopy cold on a delicate cycle and drip-dry, with no bleach. The shell is spot cleaned with warm water and mild soap. Harness and LATCH straps are surface washed only and must not go in water. The buckle can be swished in warm water without soap. Never use the carrier without its pad.
Each campaign naming this family was read against this model’s numbers and build dates, and none covers it. Still check your seat’s model number and date of manufacture before use, especially on a used seat.
The US manual lists 4 to 30 lb and 32 in or less, and the child's head must be at least 1 in below the top of the seat. Baby Jogger's product page says 4 to 35 lb and up to 32 in. The two sources disagree on weight, so check the label on your seat.
Yes. The manual describes a baseless install with the vehicle belt through the blue rear-facing belt path, and the shoulder belt can wrap behind the shell through the taxi-safe guide if it is long enough. The red level line on the side must be level with the ground.
The manual says it is certified for motor vehicles and aircraft. Use it only on forward-facing aircraft seats, and follow the manual's install-without-base steps.
Baby Jogger lists 18.078 lb for the seat with its base, and 17.25 in wide, 28 in deep and 24.5 in high. The height is 26.5 in with the RAPIDLOCK base. A carrier-only weight is not published on the page.
Baby Jogger city GO 2 infant car seat product page (opens in a new tab)
The manual says to stop using it 7 years after the manufacture date, which is printed on the underside of the seat. It also warns against a second-hand seat or base whose history you do not know.
The city turn is a rotating convertible seat that Baby Jogger rates rear-facing from 4 to 50 lb and forward-facing from 26.5 to 65 lb. It lists the city turn at 19 in wide, and the seat turns 180 degrees with one hand in rear-facing mode.
Baby Jogger city turn rotating convertible car seat product page (opens in a new tab)
Answers refer to the model and manual version on this page. Check the instructions supplied with your seat.
Other infant seats whose published weight and height limits overlap the city GO 2 Infant Car Seat.
| Mode | Weight | Height |
|---|---|---|
| Rear-facing infant (base) | 4–35 lb | Up to 32 in |
| Rear-facing infant (vehicle belt, no base) | 4–22 lb | Up to 32 in |
$349.99Price on pegperego.com as of 2026-10-07 05:48 UTC, subject to change
| Mode | Weight | Height |
|---|---|---|
| Rear-facing infant | 4–30 lb | 17–32 in |
| Mode | Weight | Height |
|---|---|---|
| Rear-facing infant | 4–30 lb | 17–32 in |
34% off$249.99List price $379.99Ponte Glacier · Amazon price as of 2026-11-01 12:08 UTC, subject to change
| Mode | Weight | Height |
|---|---|---|
| Rear-facing infant | 4–30 lb | 17–32 in |
