Maxi-Cosi Mico Pro Infant Car Seat

$219.99

Price on Amazon.com as of 2026-11-02 21:52 UTC, and subject to change.

An infant car seat with one mode: rear-facing harness (infant carrier) 4 to 30 lb, up to 32 in.

At a glance

  • Fits children from 4 to 30 lb
  • Up to 32 in tall
  • Rear-facing harness (infant carrier) only
  • Seat weighs 9.7 lb
  • 8-year usable life
  • Certified for aircraft use
Check the current price

Opens Amazon.com in a new tab. As an Amazon Associate I earn from qualifying purchases.

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Specifications checked against Maxi-Cosi’s US site and manual on . Not hands-on tested. How I research

Who is the Mico Pro Infant Car Seat for?

The Maxi-Cosi Mico Pro is a rear-facing-only infant carrier for babies from 4 to 30 lb who are 32 inches or less, with the head at least 1 inch below the top of the seat. Its stay-in-car base has 3 positions and 1-click LATCH, the carrier can be belted in without the base, and it has an 8-year life.

Reasons to consider it

  • A 3-position base with 1-click LATCH
  • Large belt guides for installing the carrier without the base
  • Fabrics that Maxi-Cosi lists as machine-washable and dryer-safe
  • Aircraft certification stated in the manual

Things to weigh up

  • The harness has to be rethreaded through the shell slots as the baby grows
  • The official manual is a scanned PDF, which makes it harder to search
  • Maxi-Cosi's comparison chart lists the carrier at 9.7 lb
  • Neither the product page nor the manual gives a width

My take on the Mico Pro Infant Car Seat

The Mico Pro suits parents who want a conventional Maxi-Cosi carrier and base at the simpler end of the line. The main trade-off is that its harness must be rethreaded to change height, unlike the no-rethread headrest on the Ambra. The closest sibling, the Mico Pro+, shares the carrier limits but adds a MaxiLock base with self-tightening LATCH.

A research summary of Maxi-Cosi’s published specifications and manual, read . Not a hands-on test or a crash-safety rating.

Who the Mico Pro Infant Car Seat fits

This seat covers one stage. Maxi-Cosi gives it a 8-year life from the date of manufacture, so check the date label before using a hand-me-down.

Rear-facing harness (infant carrier)4 to 30 lb · Up to 32 in
The child faces the back of the car, which keeps the head, neck and spine supported in a frontal crash. Keep this mode as long as the child fits it.

What are the Mico Pro Infant Car Seat weight, height and age limits?

Maxi-Cosi Mico Pro Infant Car Seat limits by mode
ModeChild weightChild heightMinimum ageConditions
Rear-facing harness (infant carrier)4 to 30 lbUp to 32 inNot publishedRear-facing only; manual states 32 in or less in height

A child must meet every limit for the mode they use. The labels on your seat and its manual are the final word.

Mico Pro Infant Car Seat specifications

Seat weight
9.7 lb
Width
Not published
Usable life
8 years
Aircraft use
Certified for aircraft (see manual for which modes)
Base weight
6.5 lb
Recline positions
3
Harness positions
5

How the Mico Pro Infant Car Seat installs

Lower anchors
1-click LATCH (base). Check your vehicle manual for which seating positions have anchors, and switch to the seat belt once the child passes the anchor weight limit in the manual.
Harness
Rethread harness (5 positions). Check the harness height at each growth spurt: at or below the shoulders rear-facing, at or above them forward-facing.

Every install is a fit between one seat and one vehicle. Read both manuals, and use a free inspection station if anything is unclear.

An empty car seat installed on a back seat, seen through an open car door

Will it fit your car?

Maxi-Cosi does not publish a width for this seat, so measure your back seat and compare it with the seat in a store before buying. It weighs 9.7 lb, which matters if you will move it between cars or carry it through an airport.

  • Check your vehicle manual for lower anchor positions and any head-restraint rules.
  • Rear-facing seats need front-seat room: try the install behind the driver before you commit.
  • Certified for aircraft use, so it can travel as a seat rather than checked baggage.

What features does the Mico Pro Infant Car Seat have?

  • 1-click LATCH (base)
  • 3-position adjustable base
  • Rethread harness (5 positions)
  • Baseless (belt) installation

Colors listed in the US

Sea Drift, Sea Shadow, Sea Salt, Seascape.

Mico Pro Infant Car Seat colors and prices

4 colors are listed on Amazon right now. Prices differ by color, so compare before choosing. The fabric is the only difference between them; the shell, harness and limits are identical. Prices were retrieved Nov 2, 9:52 PM UTC and can change.

Compare Mico Pro Infant Car Seat colors side by side
Compare colorsSea SaltCheck priceSeaDriftCheck priceSeascapeCheck priceSea ShadowCheck price
Price$219.99$186.99$219.99$219.99
AvailabilityIn stockIn stockIn stockIn stock
Price checkedNov 2, 9:52 PM UTCNov 2, 7:45 PM UTCNov 2, 7:45 PM UTCNov 2, 7:45 PM UTC

Prices and availability shown are accurate as of the time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply. As an Amazon Associate I earn from qualifying purchases.

What to know before you live with it

Installing the base or going baseless

The base installs with its LATCH lower anchor belt or with the vehicle belt, never both. The base has multiple positions; squeeze the recline handle at the front and lift or lower it to reach the right angle. Push the base down and back while pulling the belt tight, then check that it moves no more than 1 inch at the belt path. Without the base, the carrier belts in using the belt guides, and the level line on the shell must be parallel with the ground.

Source: Maxi-Cosi Mico Pro Infant Car Seat user guide (PDF)

Harness height means rethreading

The manual's fit checks are specific. The top of the child's head must be at least 1 inch below the top of the car seat. The harness straps must come from slots at the shoulder or slightly below, never above. Use the buckle slot closest to the child. To move the harness up, loosen it, unhook the strap loops from the splitter plate on the back, pull the straps out and rethread them, making sure the pad slots line up with the shell slots.

Source: Maxi-Cosi Mico Pro Infant Car Seat user guide (PDF)

Carrying and strollers

The product page describes a 1-hand release from the base and from a compatible stroller, and a contoured handle. Maxi-Cosi says the carrier works with select Maxi-Cosi strollers and sells it in bundles including the Oxford Cabin. The shell uses ClimaFlow ventilation, and the head and lumbar inserts are removable. The product page also says the fabrics are machine-washable and dryer-safe, and that the PureCosi fabric is made without added fire-retardant treatments. I would confirm that Maxi-Cosi lists your exact stroller as compatible before buying the carrier separately.

Source: Maxi-Cosi Mico Pro Infant Car Seat (IC418) product page

Is the Mico Pro Infant Car Seat recalled?

  • 23C002000: does not cover this model. Campaign 23C-002 covers infant seats and bases with self-retracting lower anchors, defined by model numbers IC313, IC335, IC336, IC337, IC338, IC351, IC370 and IC372 built May 1, 2020 to February 28, 2023. The Mico Pro is model IC418, which is not in that population. Campaign source (read ).

Each campaign naming this family was read against this model’s numbers and build dates, and none covers it. Still check your seat’s model number and date of manufacture before use, especially on a used seat.

NHTSA recall search · Recent car seat recalls

Mico Pro Infant Car Seat: common questions

What are the Mico Pro weight and height limits?

4 to 30 lb and 32 inches or less, rear-facing only. The top of the head must also stay at least 1 inch below the top of the seat.

Maxi-Cosi Mico Pro Infant Car Seat user guide (PDF) (opens in a new tab)

Are the Mico Pro fabrics machine washable?

Maxi-Cosi says all fabrics are machine-washable and dryer-safe. The head and lumbar inserts are removable.

Maxi-Cosi Mico Pro Infant Car Seat (IC418) product page (opens in a new tab)

Can I install the Mico Pro without the base?

Yes. Maxi-Cosi calls this taxi mode, with large belt guides showing where the vehicle belt goes.

Maxi-Cosi Mico Pro Infant Car Seat (IC418) product page (opens in a new tab)

Can the Mico Pro go on a plane, and when does it expire?

The manual states it is certified for aircraft use and should not be used more than 8 years after the date of manufacture.

Maxi-Cosi Mico Pro Infant Car Seat user guide (PDF) (opens in a new tab)

What does the Mico Pro+ add?

The Mico Pro+ has the same 4 to 30 lb and 32 inch limits. Its product page lists MaxiLock base technology, a 3-position base and a self-tightening LATCH system.

Maxi-Cosi Mico Pro+ Infant Car Seat product page (opens in a new tab)

Answers refer to the model and manual version on this page. Check the instructions supplied with your seat.

Before you buy

  1. Weigh and measure your child. The limits above are the manufacturer’s, and a child has to meet all of them for the mode they will use.
  2. Confirm the exact version. Colors, retail exclusives and model numbers change limits more often than you would expect; Maxi-Cosi lists 4 colors of this seat.
  3. Read the manual before you buy, not after. It is linked above and holds the fit rules, the install methods and the expiry.
  4. Check recalls by model number and date of manufacture, and register the seat with Maxi-Cosi so you hear about the next one.

Sources

Other Maxi-Cosi infant car seats

ModelTop child weightSeat weightWidthUsable life
Mico Pro Infant Car Seat (this seat)30 lb9.7 lb—8 years
Ambra Infant Car Seat30 lb7 lb—8 years
Mico Pro+ Infant Car Seat30 lb9.7 lb—8 years
Mico Luxe Infant Car Seat30 lb——8 years
Mico Luxe+ Infant Car Seat30 lb——8 years