Specifications checked against UPPAbaby’s US site and manual on . Not hands-on tested. How I research
Who is the Rove convertible car seat for?
The UPPAbaby Rove is a convertible car seat with a 5-point harness, used rear-facing from 14 to 50 lb and forward-facing from 30 to 65 lb, for children 49 inches or less. It is not a newborn seat. It installs with lower anchors or a seat belt, with a tether recommended both ways, and expires 10 years after manufacture.
Reasons to consider it
Rear-facing to 50 lb and forward-facing to 65 lb, with a 49 inch height limit
Separate blue and red belt paths, each with a lock-off door and a red-to-green indicator
A tether the manual strongly recommends for both rear- and forward-facing installs
A zip-off seat cushion fabric, with covers and the Comfort Inlay machine washable
Things to weigh up
Starts at 14 lb, so it is not a seat for the ride home from the hospital
Lower anchors are not allowed above 40 lb rear-facing or 45 lb forward-facing
UPPAbaby lists it at 18.8 inches wide and 25.2 lb
The manual warns that it may not fit all aircraft seats
My take on the Rove convertible car seat
The Rove suits a family moving on from an infant carrier who wants long rear-facing use, up to 50 lb, and a belt lock-off in each direction. The main catch is that lower anchors stop at 40 lb rear-facing and 45 lb forward-facing, so a heavier child needs the seat belt install. Unlike the Mesa V3 and Aria V2 infant seats, it starts at 14 lb and has no carrier or base.
A research summary of UPPAbaby’s published specifications and manual, read . Not a hands-on test or a crash-safety rating.
Who the Rove convertible car seat fits
This seat covers 2 stages, and a child has to meet every limit of the stage they are in. UPPAbaby gives it a 10-year life from the date of manufacture, so check the date label before using a hand-me-down.
Rear-facing harness14 to 50 lb · Up to 49 in
The child faces the back of the car, which keeps the head, neck and spine supported in a frontal crash. Keep this mode as long as the child fits it.
Forward-facing harness30 to 65 lb · Up to 49 in
The child faces forward in the seat’s own harness. Use the top tether every time, and stay in the harness until the child outgrows it.
What are the Rove convertible car seat weight, height and age limits?
UPPAbaby Rove convertible car seat limits by mode
Mode
Child weight
Child height
Minimum age
Conditions
Rear-facing harness
14 to 50 lb
Up to 49 in
Not published
Comfort Inlay used 14-20 lbs. LATCH installation limited to 40 lb rear-facing (manual)
Forward-facing harness
30 to 65 lb
Up to 49 in
Not published
LATCH installation limited to 45 lb forward-facing (manual); LATCH not the preferred forward-facing method
A child must meet every limit for the mode they use. The labels on your seat and its manual are the final word.
Rove convertible car seat specifications
Seat weight
25.2 lb
Width
18.8 in
Depth
23.8 in
Usable life
10 years
Aircraft use
Certified for aircraft (see manual for which modes)
Height range
27.4 to 32.5 in
Recline positions
5
Crotch buckle positions
3
How the Rove convertible car seat installs
Belt lock-off
Rear-facing lock-off door. A lock-off clamps the vehicle belt so you do not have to switch the belt's retractor into its locked mode.
Recline
5 recline positions. The recline angle is what keeps a young baby’s airway open, so set it before tightening the install.
Harness
No-rethread harness. Check the harness height at each growth spurt: at or below the shoulders rear-facing, at or above them forward-facing.
Every install is a fit between one seat and one vehicle. Read both manuals, and use a free inspection station if anything is unclear.
Will it fit your car?
At 18.8 in at its widest, measure your back seat before counting on three across. It weighs 25.2 lb, which matters if you will move it between cars or carry it through an airport.
Check your vehicle manual for lower anchor positions and any head-restraint rules.
Rear-facing seats need front-seat room: try the install behind the driver before you commit.
Certified for aircraft use, so it can travel as a seat rather than checked baggage.
What features does the Rove convertible car seat have?
No-rethread harness
5 recline positions
Multi-directional tether (rear- and forward-facing)
Rear-facing lock-off door
Side impact protection pods
Open belt path
Colors listed in the US
Cody, Greyson, Jake, Kavneer.
What to know before you live with it
Two belt paths and the lower anchor limits
Rear-facing installs use the blue belt path and forward-facing installs the red one. Each has a lock-off door and a SmartSecure window that turns from red to green. The manual adds that a tight install may be reached before the window is fully green, so check that the seat moves no more than 1 inch at the belt path. Lower anchors must not be used for a child over 40 lb rear-facing or 45 lb forward-facing. The center seat needs anchors no more than 22 inches apart. The tether is strongly recommended in both directions when the vehicle has an anchor point.
The seat has 5 recline positions, and the manual says 3 of them are for rear-facing. A bubble must sit in the blue area rear-facing and the red area forward-facing. When first used rear-facing, recline it fully, and a folded towel can help on sloped seats. The Comfort Inlay is for rear-facing children of about 14 to 20 lb and comes out at 20 lb or when the child starts growing over the buckle. Rear-facing, the harness sits at or 1 to 2 positions below the shoulders with at least 1 inch between the head and the top of the headrest. Forward-facing, it sits at or 1 to 2 positions above.
The seat pad unzips and comes off after raising the headrest to its highest position. The headrest and main seat fabric come off separately, but the manual says not to remove the foam because it cannot be cleaned. Seat and headrest covers, harness covers, the Comfort Inlay and the crotch buckle cover machine wash warm on a gentle cycle and tumble dry low, with hook and loop fasteners closed first. Harness webbing is spot cleaned and air dried. Lower anchor connectors are rinsed under warm water if they stop clicking.
No campaign in the current NHTSA child-restraint data names this model family, and I have not run a separate review for it. Check your seat’s model number and date of manufacture before use.
The manual gives 14 to 50 lb rear-facing and 30 to 65 lb forward-facing, with a 49 inch height limit in both. UPPAbaby recommends staying rear-facing until the 50 lb or height limit for that mode.
No. The minimum weight is 14 lb. UPPAbaby's page lists the age as approximately 3 months in one place and approximately 1 to 6 years in its specifications, so go by the 14 lb minimum and use an infant seat first.
The manual says not to use it once it is over 10 years from the date of manufacture, or after a crash. The dates are on the manufacture labels or engraved on the underside of the seat.
Yes, the manual says it is certified for aircraft use, with the lap belt through the blue path rear-facing or the red path forward-facing. It also warns the seat may not fit all aircraft and that inflatable lap belts are not compatible.
Answers refer to the model and manual version on this page. Check the instructions supplied with your seat.
Before you buy
Weigh and measure your child. The limits above are the manufacturer’s, and a child has to meet all of them for the mode they will use.
Confirm the exact version. Colors, retail exclusives and model numbers change limits more often than you would expect; UPPAbaby lists 4 colors of this seat.
Read the manual before you buy, not after. It is linked above and holds the fit rules, the install methods and the expiry.
Check recalls by model number and date of manufacture, and register the seat with UPPAbaby so you hear about the next one.