1 / 1 Product image 1

Amazon product images. See this listing on Amazon

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Cybex Cloud G Pro with Load Leg Base

$549.95

Price on Amazon.com as of 2026-11-02 05:03 UTC, and subject to change.

An infant car seat with one mode: rear-facing harness (infant carrier) 4 to 30 lb, up to 32 in.

At a glance

Fits children from 4 to 30 lb
Up to 32 in tall
Rear-facing harness (infant carrier) only
Load leg
Anti-rebound protection
Seat weighs 12 lb
17.6 in wide
6-year usable life
Certified for aircraft use

Check the current price

Opens Amazon.com in a new tab. As an Amazon Associate I earn from qualifying purchases.

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Cybex product page

Specifications checked against Cybex’s US site and manual on September 17, 2026. Not hands-on tested. How I research

Who is the Cloud G Pro with Load Leg Base for?

The Cloud G Pro is a rear-facing infant car seat for babies from 4 to 30 lb and up to 32 in tall, with the top of the head at least 1 in below the top of the carrier. It comes with a rigid LATCH load leg base, reclines near flat on a stroller, and is certified for 6 years.

Reasons to consider it

A backrest and leg rest that recline outside the vehicle, which CYBEX says is 45% flatter than upright
A one-click rigid LATCH base with an anti-rebound bar and a load leg
A 12-position headrest with an integrated harness
Installation without the base on a locking lap/shoulder belt

Things to weigh up

CYBEX lists it at 12 lbs, a real load to carry once the baby is in it
No US owner's manual was in the CYBEX Download Center when the catalog was checked, so I relied on the product page
Cloud line bases are not always interchangeable; a second car needs the Cloud G Pro / Cloud T accessory base
Not for use with inflatable seat belts

My take on the Cloud G Pro with Load Leg Base

The Cloud G Pro suits a family that will use the carrier on a CYBEX stroller often, since its backrest and leg rest recline outside the car. The trade-off is weight: CYBEX lists it at 12 lbs. It shares its limits and dimensions with the Platinum Cloud T, which adds premium fabrics and a published US manual.

A research summary of Cybex’s published specifications and manual, read October 7, 2026. Not a hands-on test or a crash-safety rating.

Who the Cloud G Pro with Load Leg Base fits

This seat covers one stage. Cybex gives it a 6-year life from the date of manufacture, so check the date label before using a hand-me-down.

Rear-facing harness (infant carrier)4 to 30 lb · Up to 32 in: The child faces the back of the car, which keeps the head, neck and spine supported in a frontal crash. Keep this mode as long as the child fits it.

What are the Cloud G Pro with Load Leg Base weight, height and age limits?

Cybex Cloud G Pro with Load Leg Base limits by mode
Mode	Child weight	Child height	Minimum age	Conditions
Rear-facing harness (infant carrier)	4 to 30 lb	Up to 32 in	Not published	Head at least 1 in below top of carrier (FAQ)

A child must meet every limit for the mode they use. The labels on your seat and its manual are the final word.

Cloud G Pro with Load Leg Base specifications

Seat weight: 12 lb
Width: 17.6 in
Usable life: 6 years
Aircraft use: Certified for aircraft (see manual for which modes)
Headrest positions: 12

How the Cloud G Pro with Load Leg Base installs

Rigid LATCH: Rigid LATCH. Rigid connectors click straight onto the vehicle's lower anchor bars, which removes the strap slack that causes loose installs.
Recline: Lie-flat recline outside vehicle. The recline angle is what keeps a young baby’s airway open, so set it before tightening the install.

Every install is a fit between one seat and one vehicle. Read both manuals, and use a free inspection station if anything is unclear.

An empty car seat installed on a back seat, seen through an open car door

Will it fit your car?

At 17.6 in at its widest, measure your back seat before counting on three across. It weighs 12 lb, which matters if you will move it between cars or carry it through an airport.

Check your vehicle manual for lower anchor positions and any head-restraint rules.
Rear-facing seats need front-seat room: try the install behind the driver before you commit.
Certified for aircraft use, so it can travel as a seat rather than checked baggage.

What features does the Cloud G Pro with Load Leg Base have?

Load leg base
Anti-rebound bar
Rigid LATCH
SensorSafe chest clip
Linear side-impact protection
12-position headrest
Lie-flat recline outside vehicle
Rear-facing only

Colors listed in the US

Almond Beige, Moon Black, Chocolate Brown, Stone Grey, Stormy Blue, Ocean Blue.

What to know before you live with it

Full recline is for the stroller, not the car

Outside the vehicle, the backrest reclines and the leg rest extends for a near-flat position, which CYBEX describes as 45% flatter than upright. It works with one hand and without adjusting the harness: hold the carry handle, squeeze the recline release handle and push the seatback down until it locks. To return to car seat mode, squeeze the release handle and lift the seatback until it locks upright. The handle stays in the carrying position. CYBEX says full recline mode is compatible with all CYBEX strollers and is only for use outside the vehicle.

Source: CYBEX Cloud G Pro with Load Leg Base product page

The base and installation

The included base uses one-click rigid LATCH and combines an anti-rebound bar with a load leg. CYBEX says never to use rigid LATCH and the vehicle seat belt together. Rigid connectors are spaced exactly 11 in apart to match standard vehicle anchors. Without the base, the carrier's alternate belt guides take a locking lap/shoulder belt, with the buckle and hardware kept clear of the carrier. Once installed, it should move less than 1 in at the belt path. If the recline falls short, a rolled towel or pool noodle goes beneath the base, with the adjustable foot stored first.

Source: CYBEX Cloud G Pro with Load Leg Base product page

Care, insert and what is in the box

The box contains the Cloud G Pro with SensorSafe, the Cloud G Pro base, an infant insert and an owner's manual. CYBEX recommends the insert until about 11 lbs or about 3 months; its side wings fold in for a smaller baby. Seat fabrics can be spot cleaned or machine washed with mild detergent in cold water on a delicate cycle, then air dried. Harness straps are spot cleaned only, and plastic parts are wiped. The SensorSafe clip sends phone alerts if it is unbuckled, if the back seat gets too warm or too cold, or if the child is left behind.

Source: CYBEX Cloud G Pro with Load Leg Base product page

Is the Cloud G Pro with Load Leg Base recalled?

23C001000: does not cover this model. Recall 23C-001 covers the Aton, Aton Q, Aton M, Aton 2 and Cloud Q with listed model numbers beginning 514, 515, 517, 518, 519 or 521, made March 13, 2017 to November 1, 2020. The Cloud G Pro (model number 525000607), a different product that only shares the Cloud name, is not among the listed model numbers. Campaign source (read October 7, 2026).

Each campaign naming this family was read against this model’s numbers and build dates, and none covers it. Still check your seat’s model number and date of manufacture before use, especially on a used seat.

NHTSA recall search · Recent car seat recalls

Cloud G Pro with Load Leg Base: common questions

What are the Cloud G Pro weight and height limits?

CYBEX lists 4 to 30 lb and up to 32 in, and the top of the head must be at least 1 in below the top of the carrier. Meeting any one of these means the seat is outgrown, and the child moves to a rear-facing convertible or all-in-one seat.

CYBEX Cloud G Pro with Load Leg Base product page (opens in a new tab)

How heavy and wide is the Cloud G Pro?

CYBEX lists it at 12 lbs, 17.6 in wide, 26.5 to 30 in long and 15.8 to 23 in tall. The page does not say whether the weight includes the base.

CYBEX Cloud G Pro with Load Leg Base product page (opens in a new tab)

Can I buy a second Cloud G Pro base for another car?

Yes. CYBEX sells a Cloud G Pro / Cloud T accessory base designed for a maximum occupant weight of 30 lbs. It warns that Cloud line bases are not always interchangeable, so check that the base matches your seat.

CYBEX Cloud G Pro with Load Leg Base product page (opens in a new tab)

Is the Cloud G Pro FAA approved?

The product page says it is approved for aircraft use under FAA requirements, and to check with the airline and the owner's manual for aircraft installation. Follow the installation steps in the manual that comes with the seat.

CYBEX Cloud G Pro with Load Leg Base product page (opens in a new tab)

How does the Cloud G Pro compare with the Cloud T?

CYBEX lists the Cloud T at 4 to 30 lb, up to 32 in, 12 lbs and 17.6 in wide. The Cloud T is the Platinum version, with premium fabrics, an L.S.P. device that folds away, and fashion fabrics that are wipe-clean only.

CYBEX Cloud T with Load Leg Base product page (opens in a new tab)

When does the Cloud G Pro expire?

CYBEX says it is certified for 6 years from the date of manufacture. The manufacture and expiration dates are on a sticker on the bottom of the seat.

CYBEX Cloud G Pro with Load Leg Base product page (opens in a new tab)

Answers refer to the model and manual version on this page. Check the instructions supplied with your seat.

Before you buy

Weigh and measure your child. The limits above are the manufacturer’s, and a child has to meet all of them for the mode they will use.
Confirm the exact version. Colors, retail exclusives and model numbers change limits more often than you would expect; Cybex lists 6 colors of this seat.
Read the manual before you buy, not after. It is linked above and holds the fit rules, the install methods and the expiry.
Check recalls by model number and date of manufacture, and register the seat with Cybex so you hear about the next one.