1 / 1 Product image 1

Amazon product images. See this listing on Amazon

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Cybex Aton G2 Swivel

$549.95

Price on Amazon.com as of 2026-11-02 13:25 UTC, and subject to change.

A rotating infant car seat with one mode: rear-facing harness (infant carrier) 4 to 30 lb, up to 32 in.

At a glance

Fits children from 4 to 30 lb
Up to 32 in tall
Rear-facing harness (infant carrier) only
Rotates for loading
Load leg
Anti-rebound protection
Seat weighs 9 lb
17.5 in wide
6-year usable life
Certified for aircraft use

Check the current price

Opens Amazon.com in a new tab. As an Amazon Associate I earn from qualifying purchases.

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Cybex product page

Specifications checked against Cybex’s US site and manual on September 17, 2026. Not hands-on tested. How I research

Who is the Aton G2 Swivel for?

The Aton G2 Swivel is a rear-facing infant car seat that CYBEX lists for babies from 4 to 30 lb and up to 32 in tall, with the top of the head at least 1 in below the top of the carrier. Its load leg base rotates 180 degrees for loading, and the seat is certified for 6 years.

Reasons to consider it

A base that rotates 180 degrees so the carrier faces you when loading
An anti-rebound bar and a load leg on the same base
A 9 lb carrier that is 17.5 in wide, as listed by CYBEX
Installation without the base on a locking lap/shoulder belt

Things to weigh up

No US owner's manual is published in the CYBEX Download Center, so I could not check the installation steps
The product page contradicts itself: one answer says 4 to 30 lb and up to 32 in, another says 4 to 35 lb and 17 to 32 in
Never swivel the seat or base while the car is moving
Rear-facing only, so a convertible seat follows

My take on the Aton G2 Swivel

The Swivel suits a parent who wants to turn the carrier toward them for loading, which CYBEX says helps most once the baby is older and heavier to carry. CYBEX publishes no US owner's manual for it in its Download Center, so this summary relies on the product page. Against the plain Aton G2, the carrier limits and dimensions are the same; the base is the difference.

A research summary of Cybex’s published specifications and manual, read October 7, 2026. Not a hands-on test or a crash-safety rating.

Who the Aton G2 Swivel fits

This seat covers one stage. Cybex gives it a 6-year life from the date of manufacture, so check the date label before using a hand-me-down.

Rear-facing harness (infant carrier)4 to 30 lb · Up to 32 in: The child faces the back of the car, which keeps the head, neck and spine supported in a frontal crash. Keep this mode as long as the child fits it.

What are the Aton G2 Swivel weight, height and age limits?

Cybex Aton G2 Swivel limits by mode
Mode	Child weight	Child height	Minimum age	Conditions
Rear-facing harness (infant carrier)	4 to 30 lb	Up to 32 in	Not published	—

A child must meet every limit for the mode they use. The labels on your seat and its manual are the final word.

Aton G2 Swivel specifications

Seat weight: 9 lb
Width: 17.5 in
Depth: 26.1 in
Usable life: 6 years
Aircraft use: Certified for aircraft (see manual for which modes)
Headrest positions: 11

How the Aton G2 Swivel installs

Harness: 11-position no-rethread headrest. Check the harness height at each growth spurt: at or below the shoulders rear-facing, at or above them forward-facing.

Every install is a fit between one seat and one vehicle. Read both manuals, and use a free inspection station if anything is unclear.

An empty car seat installed on a back seat, seen through an open car door

Will it fit your car?

At 17.5 in at its widest, this seat is one of the narrower ones in its class and is a candidate for three across in many mid-size cars. It weighs 9 lb, which matters if you will move it between cars or carry it through an airport.

Check your vehicle manual for lower anchor positions and any head-restraint rules.
Rear-facing seats need front-seat room: try the install behind the driver before you commit.
Certified for aircraft use, so it can travel as a seat rather than checked baggage.

What features does the Aton G2 Swivel have?

Rotates 180 degrees (on swivel base)
Anti-rebound base with load leg
SensorSafe chest clip
Linear side-impact protection
SafeLock belt tensioner
11-position no-rethread headrest
Rear-facing only

Colors listed in the US

Almond Beige, Moon Black, Stone Grey, Stormy Blue.

Where Cybex’s page and manual disagree

Product page: Spec list and one FAQ: 4-30 lbs, max 32 in; Product page faq: A second FAQ answer on the same page: 4-35 lbs and 17-32 in

When they differ, follow the manual and the labels on your seat.

What to know before you live with it

What the swivel base does

With the base installed, the seat turns 180 degrees toward you so you can load and unload the child. CYBEX suggests this helps most when the baby is older and carrying the carrier gets heavy, and says a younger infant under 20 pounds can be lifted straight into a compatible CYBEX carry cot. Neither the seat nor the base should be turned while the car is moving. You can leave it swiveled while parked, but it must be rotated back to the drive position before you travel on. The base also has in-base recline, so the angle can change without reinstalling it.

Source: CYBEX Aton G2 Swivel with Load Leg Base product page

Installation, as far as the page describes it

Without a published manual, the product page is the only CYBEX source. It lists an anti-rebound bar and a load leg on the swivel base and a SafeLock belt tensioner. It does not say whether the base uses rigid or flexible lower anchors; its general answer allows flexible connectors spaced 11 to 20 in apart where the vehicle maker allows it. The carrier has alternate belt guides for use without the base, with a locking lap/shoulder belt only. After installation there should be less than 1 in of movement at the belt path, and a small gap between the anti-rebound bar and the vehicle seat back is acceptable.

Source: CYBEX Aton G2 Swivel with Load Leg Base product page

Care, canopy and what comes in the box

The fabrics are machine washed separately in cold water on a delicate cycle, with no bleach, then drip dried and not ironed. The box contains the Aton G2 Swivel, the Aton G2 Swivel load leg base, the SensorSafe clip, an infant insert and an owner's manual. CYBEX recommends the insert until about 11 lbs or about 3 months. The canopy is listed as UPF50+, and the headrest has 11 positions with a no-rethread harness. The seat is listed as compatible with all CYBEX strollers and with both the Aton G2 base and the swivel base.

Source: CYBEX Aton G2 Swivel with Load Leg Base product page

Is the Aton G2 Swivel recalled?

25C002000: does not cover this model. Recall 25C-002 (Part 573, amended February 26, 2026) covers the Aton G, Aton G SensorSafe, Aton G Swivel, Aton G Swivel SensorSafe and the Eos, Libelle and Beezy travel systems with Aton G, made March 10, 2023 to May 10, 2024 (May 15, 2024 for the Eos and Aton G Travel System), and lists 24 affected model numbers, all beginning 522 (522001441 through 522005355). The Aton G2 Swivel (model number 524002401) is not among the listed model numbers. Campaign source (read October 7, 2026).
23C001000: does not cover this model. Recall 23C-001 covers the Aton, Aton Q, Aton M, Aton 2 and Cloud Q with listed model numbers beginning 514, 515, 517, 518, 519 or 521, made March 13, 2017 to November 1, 2020. The Aton G2 Swivel (model number 524002401) is not among the listed model numbers. Campaign source (read October 7, 2026).

Each campaign naming this family was read against this model’s numbers and build dates, and none covers it. Still check your seat’s model number and date of manufacture before use, especially on a used seat.

NHTSA recall search · Recent car seat recalls

Aton G2 Swivel: common questions

What are the Aton G2 Swivel weight and height limits?

The spec list says 4 to 30 lb and a maximum of 32 in, with the top of the head at least 1 in below the top of the carrier. A second answer on the same page says 4 to 35 lb and 17 to 32 in. Until CYBEX resolves it, I would go by the lower weight figure.

CYBEX Aton G2 Swivel with Load Leg Base product page (opens in a new tab)

How heavy and wide is the Aton G2 Swivel?

CYBEX lists it at 9 lbs, 17.5 in wide, 26.1 in long and 14.7 to 22.8 in tall. The page does not say whether the 9 lbs includes the base.

CYBEX Aton G2 Swivel with Load Leg Base product page (opens in a new tab)

Is the Aton G2 Swivel approved for airplanes?

The product page says it is approved for aircraft use under FAA requirements and to check with the airline before departure. Without a published US manual, I could not check the aircraft installation steps.

CYBEX Aton G2 Swivel with Load Leg Base product page (opens in a new tab)

How long does the Aton G2 Swivel last?

CYBEX says the infant seat is certified for 6 years from the date of manufacture. The manufacture and expiration dates are on a sticker on the bottom of the seat.

CYBEX Aton G2 Swivel with Load Leg Base product page (opens in a new tab)

How is the plain Aton G2 different from the Swivel?

CYBEX lists the Aton G2 at 4 to 30 lb, a maximum of 32 in, 17.5 in wide and 9 lbs, the same figures as the Swivel. Its page describes a load leg base without a swivel feature and lists only the Aton G2 load leg base as compatible.

CYBEX Aton G2 with Load Leg Base product page (opens in a new tab)

Can I use the Swivel base with a regular Aton G2?

Yes. CYBEX says new Aton G2 seats can mix and match between the standard Aton G2 base and the Aton G2 Swivel base.

CYBEX Aton G2 Swivel with Load Leg Base product page (opens in a new tab)

Answers refer to the model and manual version on this page. Check the instructions supplied with your seat.

Before you buy

Weigh and measure your child. The limits above are the manufacturer’s, and a child has to meet all of them for the mode they will use.
Confirm the exact version. Colors, retail exclusives and model numbers change limits more often than you would expect; Cybex lists 4 colors of this seat.
Read the manual before you buy, not after. It is linked above and holds the fit rules, the install methods and the expiry.
Check recalls by model number and date of manufacture, and register the seat with Cybex so you hear about the next one.

Sources

Other Cybex rotating car seats

Model	Top child weight	Seat weight	Width	Usable life
Aton G2 Swivel (this seat)	30 lb	9 lb	17.5 in	6 years
Callisto G 360	120 lb	35 lb	19.5 in	10 years
Callisto G 360 Select	120 lb	35 lb	19.5 in	10 years
Callisto T 360	120 lb	35 lb	19.5 in	10 years