| Mode | Weight | Height |
|---|---|---|
| Rear-facing infant | 4–30 lb | Up to 32 in |
- Seat weight
- 8.4 lb
- Width
- 25 in
- Usable life
- 7 years
- Aircraft
- Not stated
$269.99Price on gracobaby.com as of 2026-10-07 05:47 UTC, subject to change
1 / 6 Product image 1
Amazon product images. See this listing on Amazon
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
Graco SnugRide SnugLock LX Infant Car Seat featuring TrueShield Technology
$279.99
Price on Amazon.com as of 2026-11-02 09:11 UTC, and subject to change.
An infant car seat with one mode: rear-facing infant 4 to 30 lb, up to 32 in.
At a glance
- Fits children from 4 to 30 lb
- Up to 32 in tall
- Rear-facing infant only
- Seat weighs 8 lb
- 15.51 in wide
- 7-year usable life
Check the current price
Opens Amazon.com in a new tab. As an Amazon Associate I earn from qualifying purchases.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
Who is the SnugRide SnugLock LX Infant Car Seat featuring TrueShield Technology for?
The Graco SnugRide SnugLock LX featuring TrueShield is a rear-facing-only infant seat that Graco lists for 4 to 30 lb and up to 32 in, with the head at least 1 in below the top. Its base has a SnugLock lock-off, InRight LATCH and 4 recline positions, the carrier can be belted in alone, and it expires after 7 years.
Reasons to consider it
- A 15.51 in width and an 8.0 lb carrier on Graco's page
- A SnugLock lock-off for both LATCH and seat belt installs
- Carrier-only installation with a lap or lap-shoulder belt, certified for aircraft without the base
- A base with 4 recline positions and a level indicator marked for 0+ and 3+ months
Things to weigh up
- Changing harness height means unhooking each strap from the splitter plate and rethreading it
- No anti-rebound bar is listed in the manual or on the product page
- Graco's product page lists 4 to 30 lb, while the posted manual (NWL0000726580B, dated 3/18) says 4 to 35 lb, so go by the labels on your own seat
- The handle has 3 positions and must be upright when carrying
My take on the SnugRide SnugLock LX Infant Car Seat featuring TrueShield Technology
It suits parents who want SnugLock installation in a narrow seat: Graco lists it at 15.51 in wide with an 8.0 lb carrier, against 17.5 in and 9.0 lb for the SnugFit LX. The trade-offs are a harness that must be rethreaded to change height and a base with no anti-rebound bar listed in the manual or on the product page. Graco says TrueShield gives side-impact protection from head to hips; the manual only names the TrueShield bolster, and I make no crash-safety claim about it.
A research summary of Graco’s published specifications and manual, read . Not a hands-on test or a crash-safety rating.
Who the SnugRide SnugLock LX Infant Car Seat featuring TrueShield Technology fits
This seat covers one stage. Graco gives it a 7-year life from the date of manufacture, so check the date label before using a hand-me-down.
- Rear-facing infant4 to 30 lb · Up to 32 in
- The child faces the back of the car, which keeps the head, neck and spine supported in a frontal crash. Keep this mode as long as the child fits it.
What are the SnugRide SnugLock LX Infant Car Seat featuring TrueShield Technology weight, height and age limits?
| Mode | Child weight | Child height | Minimum age | Conditions |
|---|---|---|---|---|
| Rear-facing infant | 4 to 30 lb | Up to 32 in | Not published | Head must be at least 1 in below top of car seat |
A child must meet every limit for the mode they use. The labels on your seat and its manual are the final word.
SnugRide SnugLock LX Infant Car Seat featuring TrueShield Technology specifications
- Seat weight
- 8 lb
- Width
- 15.51 in
- Depth
- 30.87 in
- Height
- 19.96 in
- Usable life
- 7 years
- Aircraft use
- Not published
- Weight with base
- 14.6 lb
- Base recline positions
- 4
How the SnugRide SnugLock LX Infant Car Seat featuring TrueShield Technology installs
- Belt lock-off
- SnugLock installation (base). A lock-off clamps the vehicle belt so you do not have to switch the belt's retractor into its locked mode.
- Lower anchors
- InRight LATCH. Check your vehicle manual for which seating positions have anchors, and switch to the seat belt once the child passes the anchor weight limit in the manual.
- Recline
- 4 recline positions (base). The recline angle is what keeps a young baby’s airway open, so set it before tightening the install.
Every install is a fit between one seat and one vehicle. Read both manuals, and use a free inspection station if anything is unclear.
Will it fit your car?
At 15.51 in at its widest, this seat is one of the narrower ones in its class and is a candidate for three across in many mid-size cars. It weighs 8 lb, which matters if you will move it between cars or carry it through an airport.
- Check your vehicle manual for lower anchor positions and any head-restraint rules.
- Rear-facing seats need front-seat room: try the install behind the driver before you commit.
- Aircraft certification is printed on the seat’s own label; check before you fly.
What features does the SnugRide SnugLock LX Infant Car Seat featuring TrueShield Technology have?
- SnugLock installation (base)
- InRight LATCH
- 4 recline positions (base)
- TrueShield side impact technology
Colors listed in the US
Ion.
What to know before you live with it
Installing the base
The base installs with the LATCH strap or the vehicle seat belt, never both. You push it back until the front of the base touches the vehicle seat back, open the SnugLock lock-off, and route the strap, or the lap part of the belt, through the rear-facing belt path with the blue label, above the notches near the lock-off. Press down on the base while removing the slack, then close the lock-off until it clicks; the manual says the retractor does not need switching when the lock-off holds the belt. A center seat may take LATCH only if the vehicle manual allows it and the anchors are 11 in or more apart. The base should move less than 1 in at the belt path. The manual gives no separate child-weight limit for the lower anchors.
Source: Graco SnugRide SnugLock 35 LX featuring TrueShield manual (PDF)
Recline and level
The base has 4 recline positions, set by squeezing the recline lever and lifting the base to extend the foot. On level ground, the blue indicator in the clear area means level for infants 0+ months, and partly in the notched area means level for 3+ months; any blue outside the black lines means the seat is not level. A rolled towel may go under the fully extended foot if needed. Without the base, the carrier is belted in alone with a lap or lap-shoulder belt.
Source: Graco SnugRide SnugLock 35 LX featuring TrueShield manual (PDF)
Rethreading the harness
This is not a no-rethread harness. With the straps loose, you unhook each strap loop from the splitter plate at the back, pull it out the front and insert it in the slot at or just below the shoulders. If the shoulders are at or below the lowest 2 slots, the upper loops on the straps go onto the splitter plate; for the upper 2 slots, the lower loops do. The top of the head must be at least 1 in below the top of the seat. The body support may only be used with the bottom 2 sets of harness slots.
Source: Graco SnugRide SnugLock 35 LX featuring TrueShield manual (PDF)
What Graco says about TrueShield and size
Graco says TrueShield gives side-impact protection from head to hips, and that this seat was side-impact tested for occupant retention with the built-in 5-point harness. Those are Graco's statements, not my findings. Graco lists the seat at 15.51 in wide, 19.96 in high and 30.87 in deep, with an 8.0 lb carrier and 14.6 lb with the base. The carrier attaches to Graco Click Connect strollers to make a travel system.
Source: Graco SnugRide SnugLock LX featuring TrueShield product page
Is the SnugRide SnugLock LX Infant Car Seat featuring TrueShield Technology recalled?
- 26C003000: does not cover this model. Campaign 26C-003 covers only the SnugRide Turn & Slide infant seat and the Modes Nest Travel System with SnugRide Turn & Slide, listed in the Part 573 report as nine model numbers on the 8DB platform (8DB00NIR, 8DB00SDA, 8DB00MUB, 8DB49BCK and variants) plus 7DP08NRI, built December 1, 2025 to March 27, 2026, because the turntable base locking hook may let the carrier detach in a crash. The SnugRide SnugLock LX with TrueShield (model 2053220) is not named in the report; its manual is for platform 8AZ100, not 8DB, and it has no rotating turntable base. Campaign source (read ).
- 14C004000: does not cover this model. Campaign 14C-004 covers infant seats with the AmSafe QT1 buckle, limited to the SnugRide, SnugRide Classic Connect (including 30 and 35), SnugRide 30, SnugRide 35, SnugRide Click Connect 40 and Aprica A30 built between July 2010 and May 2013 (date range varies by model). The SnugRide SnugLock LX with TrueShield (model 2053220) is a current model that is not named in the report, so it is not one of those units. Campaign source (read ).
Each campaign naming this family was read against this model’s numbers and build dates, and none covers it. Still check your seat’s model number and date of manufacture before use, especially on a used seat.
SnugRide SnugLock LX Infant Car Seat featuring TrueShield Technology: common questions
What are the weight and height limits?
Graco's product page lists rear-facing use only, from 4 to 30 lb and up to 32 in, with the head at least 1 in below the top of the seat. If the labels on your seat show a different limit, follow the labels.
Graco SnugRide SnugLock LX featuring TrueShield product page (opens in a new tab)
Can it be used on a plane?
The carrier can. The manual certifies it for aircraft only without the base, on forward-facing aircraft seats, following the vehicle lap belt installation. The base is not certified for aircraft.
Graco SnugRide SnugLock 35 LX featuring TrueShield manual (PDF) (opens in a new tab)
Does the harness adjust without rethreading?
No. The manual has you unhook each strap from the splitter plate, pull it out the front and thread it into the new slot at or just below the shoulders, then repeat on the other side.
Graco SnugRide SnugLock 35 LX featuring TrueShield manual (PDF) (opens in a new tab)
How is the seat pad washed?
Unhook the straps from the splitter plate, pull out the 4 plastic flaps and pull the pad off the shell; the canopy comes off its hoop. Machine wash the pad and canopy in cold water on a delicate cycle and drip dry, with no bleach. The buckle is swished in warm water without soap.
Graco SnugRide SnugLock 35 LX featuring TrueShield manual (PDF) (opens in a new tab)
How is it different from the SnugFit LX?
Graco lists the SnugFit LX with the same limits but at 17.5 in wide with a 9.0 lb carrier, a no-rethread harness, an anti-rebound bar and a 5-position base.
When does it expire?
The manual says to stop using it and throw it away 7 years after the date of manufacture, shown on a label on the back of the seat, and to replace it after any crash.
Graco SnugRide SnugLock 35 LX featuring TrueShield manual (PDF) (opens in a new tab)
Answers refer to the model and manual version on this page. Check the instructions supplied with your seat.
Before you buy
- Weigh and measure your child. The limits above are the manufacturer’s, and a child has to meet all of them for the mode they will use.
- Confirm the exact version. Colors, retail exclusives and model numbers change limits more often than you would expect.
- Read the manual before you buy, not after. It is linked above and holds the fit rules, the install methods and the expiry.
- Check recalls by model number and date of manufacture, and register the seat with Graco so you hear about the next one.
Sources
Other Graco infant car seats
| Model | Top child weight | Seat weight | Width | Usable life |
|---|---|---|---|---|
| SnugRide SnugLock LX Infant Car Seat featuring TrueShield Technology (this seat) | 30 lb | 8 lb | 15.51 in | 7 years |
| SnugRide Lite LX Infant Car Seat | 30 lb | 7.5 lb | 15.5 in | 7 years |
| SnugRide SnugFit DLX Infant Car Seat | 30 lb | 9.8 lb | 17.5 in | 7 years |
| SnugRide SnugFit DLX Infant Car Seat featuring Safety Surround Technology | 30 lb | — | 17.5 in | 7 years |
| SnugRide SnugFit Infant Car Seat | 30 lb | 8.4 lb | 17.5 in | 7 years |
| SnugRide SnugFit LX Infant Car Seat | 30 lb | 9 lb | 17.5 in | 7 years |
| SnugRide DLX Infant Car Seat featuring Load Leg Technology | 30 lb | 8.4 lb | 25 in | 7 years |
| GoMax Infant Car Seat featuring Insta-Install Rigid LATCH | 30 lb | 10.9 lb | — | 7 years |
Seats to compare with the SnugRide SnugLock LX Infant Car Seat featuring TrueShield Technology
Other infant seats whose published weight and height limits overlap the SnugRide SnugLock LX Infant Car Seat featuring TrueShield Technology.
| Mode | Weight | Height |
|---|---|---|
| Rear-facing infant | 4–30 lb | Up to 32 in |
- Seat weight
- 7.5 lb
- Width
- 15.5 in
- Usable life
- 7 years
- Aircraft
- Not stated
$139.97Studio · Amazon price as of 2026-11-02 09:11 UTC, subject to change
| Mode | Weight | Height |
|---|---|---|
| Rear-facing infant | 4–30 lb | Up to 32 in |
- Seat weight
- 9.8 lb
- Width
- 17.5 in
- Usable life
- 7 years
- Aircraft
- Not stated
$239.99Maison · Amazon price as of 2026-11-02 09:11 UTC, subject to change
| Mode | Weight | Height |
|---|---|---|
| Rear-facing infant | 4–30 lb | Up to 32 in |
- Seat weight
- Not published
- Width
- 17.5 in
- Usable life
- 7 years
- Aircraft
- Not stated