Britax UpNGo Backless Booster Seat
| Mode | Weight | Height |
|---|---|---|
| Backless booster | 40–120 lb | 46–63 in |
- Seat weight
- 3.1 lb
- Width
- 17.1 in
- Usable life
- 10 years
- Aircraft
- Not certified
$59.99Raven Black · Amazon price as of 2026-11-02 21:50 UTC, subject to change
1 / 8 Product image 1
Amazon product images. See this listing on Amazon
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
Price on Amazon.com as of 2026-11-02 21:50 UTC, and subject to change.
A backless booster seat with one mode: backless booster 40 to 120 lb, 46 to 63 in.
Opens Amazon.com in a new tab. As an Amazon Associate I earn from qualifying purchases.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
The Britax UpNGo Click is a backless belt-positioning booster for children 40 to 120 lb and 46 to 63 in. It has rigid lower anchor attachments with a green connection indicator, weighs 4.5 lb and measures 17.1 in wide. The vehicle lap and shoulder belt restrains the child, and the manual sets a 10-year life.
It suits a family that wants a narrow, light backless booster that stays attached to the car between rides. The rigid LATCH holds the booster in place but does not restrain the child, and it must not be used if the anchors spoil belt fit. Compared with the plain UpNGo it has the same size and limits, and Britax lists the plain model at 3.1 lb against 4.5 lb for this one.
A research summary of Britax’s published specifications and manual, read . Not a hands-on test or a crash-safety rating.
This seat covers one stage. Britax gives it a 10-year life from the date of manufacture, so check the date label before using a hand-me-down.
| Mode | Child weight | Child height | Minimum age | Conditions |
|---|---|---|---|---|
| Backless booster | 40 to 120 lb | 46 to 63 in | Not published | — |
A child must meet every limit for the mode they use. The labels on your seat and its manual are the final word.
Every install is a fit between one seat and one vehicle. Read both manuals, and use a free inspection station if anything is unclear.

At 17.1 in at its widest, this seat is one of the narrower ones in its class and is a candidate for three across in many mid-size cars. It weighs 4.5 lb, which matters if you will move it between cars or carry it through an airport.
Raven Black, Parchment.
The rigid attachments slide out of the back of the booster. Squeeze both sides of each adjuster and slide the attachment out, then push it firmly onto the vehicle's lower anchor. The indicator on the adjuster turns green when it is connected. Then push the booster back until it touches the vehicle seat back. To remove it, squeeze each adjuster until it clicks and the indicator turns red. The attachments are not required, and the manual says not to use them if the lower anchors stop the belt fitting the child.
Use the booster only in a seating position with a vehicle head restraint, with the top of the child's ears below it. Route the lap belt under both armrests and the shoulder belt behind the armrest on the buckle side, buckle and remove slack. If the shoulder belt does not lie flat across the shoulder and chest, use the shoulder belt guide: loop it through the carry handle, slide it onto the shoulder belt and adjust it to sit at the top of the child's shoulder. The base must not overhang the vehicle seat.
The cover comes off by unhooking two elastic loops at the front and untucking the fabric from under the belt path. Follow the care label, and do not bleach or iron. Sponge clean the shell with warm water and mild soap, without solvents or abrasive cleaners. The cup holders are dishwasher safe, top shelf only. Stop using the booster when it is older than 10 years or after a moderate or severe crash; the date is on the label on the bottom.
No campaign in the current NHTSA child-restraint data names this model family, and I have not run a separate review for it. Check your seat’s model number and date of manufacture before use.
It is for children who weigh 40 to 120 lb and are 46 to 63 in tall, forward-facing, in a seat with a vehicle head restraint.
No. The rigid lower anchor attachments are optional. If you do not use them, store them in the seat so they do not interfere, and buckle the vehicle belt across the empty booster.
The indicator on each adjuster turns green when that attachment is connected to the lower anchor. When you release it, it clicks and turns red.
No. The manual says it is not certified for aircraft because aircraft do not have shoulder belts.
The plain UpNGo lists the same 40 to 120 lb and 46" to 63" range and the same 17.1" width, does not list LATCH connectors, and Britax lists it at 3.1 lb.
Britax UpNGo Backless Booster product page (opens in a new tab)
Answers refer to the model and manual version on this page. Check the instructions supplied with your seat.
| Model | Top child weight | Seat weight | Width | Usable life |
|---|---|---|---|---|
| UpNGo Click Backless Booster Seat (this seat) | 120 lb | 4.5 lb | 17.1 in | 10 years |
| Grow With You ClickTight Harness-2-Booster Car Seat | 120 lb | 25 lb | — | 9 years |
| Grow With You Harness-2-Booster Car Seat | 120 lb | 23 lb | — | 9 years |
| Highpoint 2-Stage Belt-Positioning Booster | 120 lb | 12 lb | — | 10 years |
| Skyline 2-Stage Belt-Positioning Booster | 120 lb | 11 lb | — | 10 years |
| UpNGo Backless Booster Seat | 120 lb | 3.1 lb | 17.1 in | 10 years |