Britax Skyline 2-Stage Belt-Positioning Booster

$137.28

Price on Amazon.com as of 2026-11-02 00:49 UTC, and subject to change.

A 2-in-1 booster seat with 2 modes: high-back booster 40 to 120 lb, 44 to 63 in; backless booster 48 to 120 lb, 46 to 63 in.

At a glance

  • Fits children from 40 to 120 lb
  • Up to 63 in tall
  • 2 modes: high-back booster, backless booster
  • Seat weighs 11 lb
  • 10-year usable life
Check the current price

Opens Amazon.com in a new tab. As an Amazon Associate I earn from qualifying purchases.

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Specifications checked against Britax’s US site and manual on . Not hands-on tested. How I research

Who is the Skyline 2-Stage Belt-Positioning Booster for?

The Britax Skyline is a 2-stage belt-positioning booster. With the backrest it fits children 40 to 120 lb and 44 to 63 in, with a seated shoulder height up to 21.5 in; backless, 48 to 120 lb and 46 to 63 in. It uses the vehicle lap and shoulder belt, has quick-push lower connectors and expires after 10 years.

Reasons to consider it

  • High-back use from 40 to 120 lb and backless use from 48 to 120 lb
  • A 10-position headrest and a listed 15" shoulder width
  • Lower connectors to keep the booster secured when empty
  • A 10-year useful life

Things to weigh up

  • No SecureGuard clip for lap belt positioning
  • Only lap-shoulder belts can be used; lap-only, motorized and door-mounted belts cannot
  • Not certified for aircraft
  • Backless use needs a vehicle head restraint in that seating position

My take on the Skyline 2-Stage Belt-Positioning Booster

It suits a family that wants a high-back booster that converts to backless, without extra parts for the lap belt. The trade-off against the Highpoint is that there is no SecureGuard clip, so lap belt position depends on the armrests and base belt guides. Britax lists the Skyline at 11 lb against 12 lb for the Highpoint, with the same 16" x 21" x 27.5" dimensions and the same limits.

A research summary of Britax’s published specifications and manual, read . Not a hands-on test or a crash-safety rating.

Who the Skyline 2-Stage Belt-Positioning Booster fits

This seat covers 2 stages, and a child has to meet every limit of the stage they are in. Britax gives it a 10-year life from the date of manufacture, so check the date label before using a hand-me-down.

High-back booster40 to 120 lb · 44 to 63 in
The seat’s own back and belt guide route the vehicle belt across the shoulder, and the sides give the child something to lean on when they sleep.
Backless booster48 to 120 lb · 46 to 63 in
Only the base is left, so the vehicle seat has to support the child’s back and head, and the belt guide sits at the hip.

What are the Skyline 2-Stage Belt-Positioning Booster weight, height and age limits?

Britax Skyline 2-Stage Belt-Positioning Booster limits by mode
ModeChild weightChild heightMinimum ageConditions
High-back booster40 to 120 lb44 to 63 inNot publishedSeated shoulder height up to 21.5 in
Backless booster48 to 120 lb46 to 63 inNot published—

A child must meet every limit for the mode they use. The labels on your seat and its manual are the final word.

Skyline 2-Stage Belt-Positioning Booster specifications

Seat weight
11 lb
Width
Not published
Usable life
10 years
Aircraft use
Not certified for aircraft
Dimensions
16" x 21" x 27.5"
Headrest positions
10
Buckle strap depth
8.5 in
Seat area depth
14 in
Seat area width
12 in
Shoulder width
15 in
Max seated shoulder height
21.5 in
An empty car seat installed on a back seat, seen through an open car door

Will it fit your car?

Britax does not publish a width for this seat, so measure your back seat and compare it with the seat in a store before buying. It weighs 11 lb, which matters if you will move it between cars or carry it through an airport.

  • Check your vehicle manual for lower anchor positions and any head-restraint rules.
  • Rear-facing seats need front-seat room: try the install behind the driver before you commit.
  • Not certified for aircraft use: plan on gate-checking it or using a different seat to fly.

What features does the Skyline 2-Stage Belt-Positioning Booster have?

  • Converts high-back to backless
  • Quick-push lower connectors
  • 10-position headrest

Colors listed in the US

Dusk.

What to know before you live with it

Positioning the booster and the lower connectors

Lower connectors are optional and only hold the booster in place. Fully release the adjuster strap on both sides, then push the connectors onto the lower anchors, starting with the one farthest from you. A click helps confirm they are on; if there is no click, the strap may be twisted or there may be debris in the connector. Guide the booster back while pulling the strap, and stop once the slack is gone, because overtightening can push the backrest forward. The base must not overhang the vehicle seat.

Source: Britax Skyline booster user guide (PDF)

Headrest and belt fit

Squeeze and hold the headrest adjuster, slide the headrest, then pull up to confirm it has locked. With the child sitting upright, the top of the headrest should be above the ears and the shoulder belt should pass through the shoulder belt guide and lie across the middle of the chest at or just above the shoulder. The lap belt goes under both armrests and over both base belt guides, and the shoulder part goes under the armrest on the buckle side. Do not recline the backrest past the first click.

Source: Britax Skyline booster user guide (PDF)

Using it backless

Backless use is for children 48 to 120 lb and 46 to 63 in, and only in a seating position with a vehicle head restraint. The top of the child's ears must be below the top of that head restraint. The belt routing stays the same: lap belt under both armrests and over the base belt guides, shoulder belt under the armrest on the buckle side. Lower connectors can still be attached to keep the base secured.

Source: Britax Skyline booster user guide (PDF)

Covers, cup holders and expiry

The base, backrest and headrest covers are held with elastic loops. Remove the plastic insert from the headrest cover before washing. Follow the care label and do not bleach or iron. Sponge clean the shell with warm water and mild soap. The cup holders are dishwasher safe on the top shelf only, and they can be removed to make room for side-by-side seating. Stop using the booster after 10 years or a moderate or severe crash.

Source: Britax Skyline booster user guide (PDF)

Is the Skyline 2-Stage Belt-Positioning Booster recalled?

No campaign in the current NHTSA child-restraint data names this model family, and I have not run a separate review for it. Check your seat’s model number and date of manufacture before use.

NHTSA recall search · Recent car seat recalls

Skyline 2-Stage Belt-Positioning Booster: common questions

What are the Skyline booster limits?

With the backrest, 40 to 120 lb and 44 to 63 in. Without it, 48 to 120 lb and 46 to 63 in.

Britax Skyline booster user guide (PDF) (opens in a new tab)

What is the Skyline's seated shoulder height limit?

Britax lists a seated shoulder height of up to 21.5 in for high-back mode, alongside a child height of 44" to 63".

Britax Skyline 2-Stage Belt-Positioning Booster product page (opens in a new tab)

Does the Skyline have to use LATCH?

No. Lower connectors are not required. If you skip them, store them in the base and secure the empty booster with the vehicle seat belt.

Britax Skyline booster user guide (PDF) (opens in a new tab)

Can the Skyline be used on a plane?

No. The manual says it is not certified for aircraft because aircraft do not have shoulder belts.

Britax Skyline booster user guide (PDF) (opens in a new tab)

Skyline or Highpoint?

The Highpoint lists the same limits and 16" x 21" x 27.5" dimensions, adds a SecureGuard clip, and Britax lists it at 12 lb.

Britax Highpoint 2-Stage Belt-Positioning Booster product page (opens in a new tab)

How do I remove the Skyline backrest?

Put the booster on a flat surface, push the backrest down until it lies flat, then keep pushing until it separates from the base. Store the backrest somewhere cool and dry.

Britax Skyline booster user guide (PDF) (opens in a new tab)

Answers refer to the model and manual version on this page. Check the instructions supplied with your seat.

Before you buy

  1. Weigh and measure your child. The limits above are the manufacturer’s, and a child has to meet all of them for the mode they will use.
  2. Confirm the exact version. Colors, retail exclusives and model numbers change limits more often than you would expect.
  3. Read the manual before you buy, not after. It is linked above and holds the fit rules, the install methods and the expiry.
  4. Check recalls by model number and date of manufacture, and register the seat with Britax so you hear about the next one.

Sources

Other Britax booster seats

ModelTop child weightSeat weightWidthUsable life
Skyline 2-Stage Belt-Positioning Booster (this seat)120 lb11 lb—10 years
Grow With You ClickTight Harness-2-Booster Car Seat120 lb25 lb—9 years
Grow With You Harness-2-Booster Car Seat120 lb23 lb—9 years
Highpoint 2-Stage Belt-Positioning Booster120 lb12 lb—10 years
UpNGo Backless Booster Seat120 lb3.1 lb17.1 in10 years
UpNGo Click Backless Booster Seat120 lb4.5 lb17.1 in10 years