1 / 1 Image from Safety 1st
Image: Safety 1st, from safety1st.com. Colors may differ from the seat you buy.
A harness-to-booster seat with 3 modes: forward-facing harness booster 30 to 65 lb, 34.4 to 49 in; belt-positioning booster (high-back) 40 to 100 lb, 43.4 to 57 in; backless booster 40 to 100 lb, 43.4 to 57 in.
NHTSA campaign 25C004000 covers this model. Shopping links stay paused; see the recall section below.
The Disney Baby MagicSquad 3-in-1 (BC167) is a forward-facing harness booster for 30 to 65 lb and 34.4 to 49 in, then a high-back or backless booster for 40 to 100 lb and 43.4 to 57 in, per the product page. It has a 1-hand, 7-position headrest and shares its manual with the Boost-and-Go line.
The MagicSquad suits a family that wants the 3-mode harness-to-booster layout with Disney prints. Its shared manual gives some heights as 34 in and 43 in rather than the page's 34.4 and 43.4 in, so I would check the labels on the seat itself. The Comfort Ride 3-in-1 page lists the same weight and height ranges.
A research summary of Safety 1st’s published specifications and manual, read . Not a hands-on test or a crash-safety rating.
This seat covers 3 stages, and a child has to meet every limit of the stage they are in. Safety 1st gives it a 10-year life from the date of manufacture, so check the date label before using a hand-me-down.
| Mode | Child weight | Child height | Minimum age | Conditions |
|---|---|---|---|---|
| Forward-facing harness booster | 30 to 65 lb | 34.4 to 49 in | Not published | — |
| Belt-positioning booster (high-back) | 40 to 100 lb | 43.4 to 57 in | Not published | — |
| Backless booster | 40 to 100 lb | 43.4 to 57 in | Not published | — |
A child must meet every limit for the mode they use. The labels on your seat and its manual are the final word.
Safety 1st does not publish a width for this seat, so measure your back seat and compare it with the seat in a store before buying.
Mickey Blogger, Minnie Dot Party.
When they differ, follow the manual and the labels on your seat.
The shared manual gives harness mode as 30 to 65 lb and 34 to 49 in, for a child at least 1 year old. The lower anchor belt with tether must not be used for a child weighing more than 55 lb, while the lap and shoulder belt or lap belt with tether may be used up to 65 lb. When anchors are available, the tether must always be attached. The installed seat should not move more than 1 in side to side at the belt path. The tops of the child's ears must be below the top of the headrest.
The manual lists both booster modes at 40 to 100 lb and 43 to 57 in. The harness system is removed and stored, and the headrest goes to its highest position during the change. Do not use the booster if the child's head is less than 5 in below the roof of the car. In high-back mode, the shoulder belt runs through the guide in the headrest. In backless mode, the lap and shoulder belt both route through the booster belt path, with the lap belt low on the hips, not the stomach. The backrest lifts out after the harness is removed.
Depending on the version, the seat has harness covers, a buckle cover and a body pillow, all removable. The manual says not to use the harness covers if they stop the chest clip sitting correctly. Its cleaning page says to turn the seat pad inside-out before machine washing, wash it separately in cold water on a gentle cycle without bleach, and tumble dry 10 to 12 minutes on low heat. It also says only the top harness cover can be machine washed, so I would check which pieces your seat has first. The cup holders are top-rack dishwasher safe.
NHTSA currently lists one campaign naming this Safety 1st family: 25C004000. A campaign names a family, not always every build, so check your seat’s model number and date of manufacture against the campaign itself.
Shopping links stay paused while a campaign covers this model.
The product page lists the harness booster at 30 to 65 lb and 34.4 to 49 in, and the high-back and backless boosters at 40 to 100 lb and 43.4 to 57 in.
Safety 1st: Disney Baby MagicSquad 3-in-1 Harness Booster Car Seat (BC167) (opens in a new tab)
The manual says it is certified for aircraft use with the internal harness, following the forward-facing steps without the tether. It is not certified as a booster because aircraft seats have no shoulder belts.
Boost-and-Go / Disney MagicSquad user guide (PDF) (opens in a new tab)
The manual says not to use the seat more than 10 years after its date of manufacture.
Boost-and-Go / Disney MagicSquad user guide (PDF) (opens in a new tab)
In harness mode, with the tether, for a child up to 55 lb. The manual says to switch to the vehicle belt and tether for a heavier child, up to 65 lb.
Boost-and-Go / Disney MagicSquad user guide (PDF) (opens in a new tab)
The Comfort Ride page lists the same ranges: 30 to 65 lb and 34.4 to 49 in with the harness, and 40 to 100 lb and 43.4 to 57 in as a high-back or backless booster. It also lists a 7-position headrest and harness.
Safety 1st: Comfort Ride 3-in-1 Booster Car Seat (BC191) (opens in a new tab)
Answers refer to the model and manual version on this page. Check the instructions supplied with your seat.
| Model | Top child weight | Seat weight | Width | Usable life |
|---|---|---|---|---|
| Disney Baby MagicSquad 3-in-1 Harness Booster Car Seat (this seat) | 100 lb | — | — | 10 years |
| Grand 2-in-1 Booster Car Seat | 100 lb | — | — | — |
| Boost-and-Go Essential 3-in-1 Booster Car Seat | 100 lb | — | — | — |
| Comfort Ride 3-in-1 Booster Car Seat | 100 lb | — | — | 10 years |
| Disney Baby Finale 2-in-1 Booster Car Seat (BC209) | 100 lb | — | — | 10 years |
| Disney Baby Finale 2-in-1 Booster Car Seat (BC220) | 100 lb | — | — | 10 years |
| Grow and Go 2-in-1 Belt-Positioning Booster Car Seat featuring ComfortWings | 100 lb | — | — | 10 years |
| Store 'n Go Sport Booster Car Seat | 100 lb | — | — | 10 years |
| Disney Baby Pronto! Belt-Positioning Booster Car Seat | 100 lb | — | — | 10 years |
| Comfort Ride Lite Booster Car Seat | 100 lb | — | — | — |
| Disney Baby Rise LX Booster Car Seat | 100 lb | — | — | 10 years |
Other harness-to-booster seats whose published weight and height limits overlap the Disney Baby MagicSquad 3-in-1 Harness Booster Car Seat.
| Mode | Weight | Height |
|---|---|---|
| Forward-facing harness booster | 30–65 lb | 34.4–49 in |
| Belt-positioning booster (high-back) | 40–100 lb | 43.4–57 in |
| Backless booster | 40–100 lb | 43.4–57 in |
| Mode | Weight | Height |
|---|---|---|
| Forward-facing harness booster | 30–65 lb | 34.4–49 in |
| Belt-positioning booster (high-back) | 40–100 lb | 43.4–57 in |
| Backless booster | 40–100 lb | 43.4–57 in |
$84.00Price on safety1st.com as of 2026-10-07 05:49 UTC, subject to change
| Mode | Weight | Height |
|---|---|---|
| Forward-facing harness booster | 40–65 lb | 43.4–49 in |
| Belt-positioning booster (high-back) | 40–100 lb | 43.4–52 in |
$79.99Price on safety1st.com as of 2026-10-07 05:49 UTC, subject to change
| Mode | Weight | Height |
|---|---|---|
| Forward-facing harness booster | 40–65 lb | 43.4–49 in |
| Belt-positioning booster (high-back) | 40–100 lb | 43.4–52 in |
$87.99Price on safety1st.com as of 2026-10-07 05:49 UTC, subject to change
