Safety 1st Disney Baby Rise LX Booster Car Seat

$29.99

Price on Amazon.com as of 2026-11-02 17:40 UTC, and subject to change.

A backless booster seat with one mode: backless booster 40 to 100 lb, 43.4 to 57 in.

At a glance

  • Fits children from 40 to 100 lb
  • Up to 57 in tall
  • Backless booster only
  • 10-year usable life
Check the current price

Opens Amazon.com in a new tab. As an Amazon Associate I earn from qualifying purchases.

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Specifications checked against Safety 1st’s US site and manual on . Not hands-on tested. How I research

Who is the Disney Baby Rise LX Booster Car Seat for?

The Disney Baby Rise LX is a backless booster for children 40 to 100 lb and 43.4 to 57 in. It uses only the vehicle lap and shoulder belt, has covered higher armrests and a wide base, and the manual says not to use it more than 10 years after manufacture. It is not certified for aircraft use.

Reasons to consider it

  • Backless use at 40 to 100 lb and 43.4 to 57 in
  • Covered higher armrests and a wide base meant to help children buckle themselves
  • A short manual with a 10-year expiry stated
  • A pad that is machine washable and slips off over the armrests

Things to weigh up

  • Backless only; the manual says head and body protection depend on the vehicle
  • The ears must not be above the vehicle seat back or headrest
  • Not certified for aircraft use, because aircraft seats lack shoulder belts
  • The manual is a shared Cosco Rise LX and Topside sheet

My take on the Disney Baby Rise LX Booster Car Seat

The Rise LX suits an older child who fits the vehicle belt well with a little lift and whose seat has a headrest at or above ear level. The trade-off is that it is backless only, so head and side support depend on the vehicle. The Comfort Ride Lite has the same 40 to 100 lb and 43.4 to 57 in limits, plus lap belt guides, a positioning clip and two cup holders, but no linked manual.

A research summary of Safety 1st’s published specifications and manual, read . Not a hands-on test or a crash-safety rating.

Who the Disney Baby Rise LX Booster Car Seat fits

This seat covers one stage. Safety 1st gives it a 10-year life from the date of manufacture, so check the date label before using a hand-me-down.

Backless booster40 to 100 lb · 43.4 to 57 in
Only the base is left, so the vehicle seat has to support the child’s back and head, and the belt guide sits at the hip.

What are the Disney Baby Rise LX Booster Car Seat weight, height and age limits?

Safety 1st Disney Baby Rise LX Booster Car Seat limits by mode
ModeChild weightChild heightMinimum ageConditions
Backless booster40 to 100 lb43.4 to 57 inNot published—

A child must meet every limit for the mode they use. The labels on your seat and its manual are the final word.

Disney Baby Rise LX Booster Car Seat specifications

Seat weight
Not published
Width
Not published
Usable life
10 years
Aircraft use
Not certified for aircraft
An empty car seat installed on a back seat, seen through an open car door

Will it fit your car?

Safety 1st does not publish a width for this seat, so measure your back seat and compare it with the seat in a store before buying.

  • Check your vehicle manual for lower anchor positions and any head-restraint rules.
  • Rear-facing seats need front-seat room: try the install behind the driver before you commit.
  • Not certified for aircraft use: plan on gate-checking it or using a different seat to fly.

What features does the Disney Baby Rise LX Booster Car Seat have?

  • Armrests

Colors listed in the US

Tropical Stitch.

What to know before you live with it

Using it in the vehicle

Center the booster in a forward-facing seat with the vehicle seat back upright. The child sits with back flat against the vehicle seat. The lap portion goes under both armrests and across the upper thighs and hips, not the stomach, and the shoulder belt goes under the buckle-side armrest only. Do not use it if the top of the child's ears is above the vehicle seat back or headrest, or if the head is less than 5 in below the roof. Lap-only and inflatable belts are not allowed, and the booster must stay belted when empty.

Source: Disney Baby Rise LX Booster Car Seat user guide (PDF)

What a backless booster does not do

The manual is direct about this: by design a backless booster has no back or headrest, it helps position the vehicle belt, and any added protection of the body or head depends on the vehicle's own systems. It asks parents to consider that when choosing the seating position. It also says rear seats are statistically safer for children than front seats, and that some vehicles have no seating position that works with this booster. If unsure, it suggests the vehicle manual, Dorel's Consumer Care line, or a Child Passenger Inspection Station.

Source: Disney Baby Rise LX Booster Car Seat user guide (PDF)

Cleaning, storage and expiry

Starting from the front, pull the pad off the shell and over the armrests. Machine wash separately in cold water on a gentle cycle, then tumble dry separately for 10 to 12 minutes on low heat and remove it immediately; no bleach, harsh cleaners or dry cleaning. Do not use the booster without the pad. The instruction sheet folds and stores under the pad. The date of manufacture is on the bottom, and the manual says not to use it after 10 years or after any crash.

Source: Disney Baby Rise LX Booster Car Seat user guide (PDF)

Is the Disney Baby Rise LX Booster Car Seat recalled?

No campaign in the current NHTSA child-restraint data names this model family, and I have not run a separate review for it. Check your seat’s model number and date of manufacture before use.

NHTSA recall search · Recent car seat recalls

Disney Baby Rise LX Booster Car Seat: common questions

What are the Rise LX booster limits?

The manual and product page list 40 to 100 lb and 43.4 to 57 in. The child can also stop once the vehicle lap and shoulder belt fits without a booster.

Disney Baby Rise LX Booster Car Seat user guide (PDF) (opens in a new tab)

Does the Rise LX need replacing after a crash?

Yes. The manual says not to use a booster that has been in a crash and that you must get a new one.

Disney Baby Rise LX Booster Car Seat user guide (PDF) (opens in a new tab)

Is the Rise LX FAA approved?

No. The manual says it is not certified for aircraft use because aircraft seats do not have shoulder belts.

Disney Baby Rise LX Booster Car Seat user guide (PDF) (opens in a new tab)

Will three Rise LX boosters fit across a back seat?

Safety 1st says the slim booster fits 3 across the back seat of most vehicles. It does not publish the booster's width, so I would measure before counting on it.

Safety 1st Disney Baby Rise LX Booster product page (opens in a new tab)

How is the Rise LX different from the Comfort Ride Lite?

Safety 1st lists the Comfort Ride Lite at 40 to 100 lb and 43.4 to 57 in, the same as the Rise LX. The Comfort Ride Lite adds lap belt guides, a seatbelt positioning clip and two removable cup holders.

Safety 1st Comfort Ride Lite Booster product page (opens in a new tab)

Answers refer to the model and manual version on this page. Check the instructions supplied with your seat.

Before you buy

  1. Weigh and measure your child. The limits above are the manufacturer’s, and a child has to meet all of them for the mode they will use.
  2. Confirm the exact version. Colors, retail exclusives and model numbers change limits more often than you would expect.
  3. Read the manual before you buy, not after. It is linked above and holds the fit rules, the install methods and the expiry.
  4. Check recalls by model number and date of manufacture, and register the seat with Safety 1st so you hear about the next one.

Sources

Other Safety 1st booster seats