1 / 1 Image from Safety 1st
Image: Safety 1st, from safety1st.com. Colors may differ from the seat you buy. See it on safety1st.com
A harness-to-booster seat with 2 modes: forward-facing harness booster 40 to 65 lb, 43.4 to 49 in; belt-positioning booster (high-back) 40 to 100 lb, 43.4 to 52 in.
$87.99on safety1st.com, as of 2026-10-07 05:49 UTC. Prices change.
Buy from Safety 1st (opens safety1st.com in a new tab)Sold by Safety 1st. Not an affiliate link; this site earns nothing from it.
The Disney Baby Finale 2-in-1 (BC220) is a forward-facing harness booster for children 40 to 65 lb and 43.4 to 49 in, then a high-back belt-positioning booster for 40 to 100 lb and 43.4 to 52 in. It expires 10 years after manufacture and is certified for aircraft use only with the harness.
The Finale BC220 suits a child of at least 40 lb who still needs a 5-point harness, with a high-back booster mode for later. The trade-off is the 52 in booster height limit, and the pad cannot come off without removing the harness system. It shares its limits with the Finale BC209 and the Grand 2-in-1; the Comfort Ride 3-in-1 starts its harness at 30 lb and lists 57 in for booster use.
A research summary of Safety 1st’s published specifications and manual, read . Not a hands-on test or a crash-safety rating.
This seat covers 2 stages, and a child has to meet every limit of the stage they are in. Safety 1st gives it a 10-year life from the date of manufacture, so check the date label before using a hand-me-down.
| Mode | Child weight | Child height | Minimum age | Conditions |
|---|---|---|---|---|
| Forward-facing harness booster | 40 to 65 lb | 43.4 to 49 in | Not published | — |
| Belt-positioning booster (high-back) | 40 to 100 lb | 43.4 to 52 in | Not published | — |
A child must meet every limit for the mode they use. The labels on your seat and its manual are the final word.
Every install is a fit between one seat and one vehicle. Read both manuals, and use a free inspection station if anything is unclear.
Safety 1st does not publish a width for this seat, so measure your back seat and compare it with the seat in a store before buying.
Tropical Stitch.
The manual gives three harness-mode methods, all with the top tether: lower anchor belt, lap belt, or lap and shoulder belt. Do not use the lower anchors once the child weighs more than 50 lb; the vehicle belt must be used above that, up to 65 lb. Never use the lower anchor belt and vehicle belt together. A vehicle belt must lock, either through a switchable or automatic locking retractor or a locking latch plate, and the manual lists emergency locking retractor lap-only belts and inflatable belts as never usable. When a tether anchor exists, attach and tighten the tether every time.
Source: Disney Baby Finale 2-in-1 Booster Car Seat user guide (PDF)
The child must stay in harness mode until outgrowing 65 lb, 49 in, or the harness fit rules. The top of the ears must be below the top of the seat, and the shoulder straps must come from slots at the shoulders or slightly above, never below. Changing slots means fully loosening the straps, unhooking both loops from the splitter plate at the back, rethreading them into the right slots, and reattaching them with the sewn ends facing you. The buckle strap must not be under or behind the child. The manual says to check strap wear often and not to use damaged straps.
Source: Disney Baby Finale 2-in-1 Booster Car Seat user guide (PDF)
Booster mode covers 40 to 100 lb and 43.4 to 52 in. The harness system comes off and is stored, and the lower anchor belt and tether must be clipped to their storage points, since LATCH is not used in this mode. Place the seat flush against an upright vehicle seat back. The lap belt goes under both armrests and across the hips and upper thighs, and the shoulder belt goes under the buckle-side armrest only. Do not use it if the top of the ears is above the seat or the head is less than 5 in from the roof. Keep it belted when empty.
Source: Disney Baby Finale 2-in-1 Booster Car Seat user guide (PDF)
The harness system must be removed before the pad comes off; then the elastic straps are released from tabs on the back of the shell and the pad pulls off. Machine wash the pad separately in cold water on a gentle cycle without bleach, and tumble dry separately for 10 to 12 minutes on low heat, removing it immediately. Spot clean the harness straps and the shell with warm sudsy water, and do not submerge the buckle. The manual says not to lubricate a sticking buckle or release lever, and to clean out debris instead.
Source: Disney Baby Finale 2-in-1 Booster Car Seat user guide (PDF)
No campaign in the current NHTSA child-restraint data names this model family, and I have not run a separate review for it. Check your seat’s model number and date of manufacture before use.
Harness mode is 40 to 65 lb and 43.4 to 49 in. High-back booster mode is 40 to 100 lb and 43.4 to 52 in.
Safety 1st Disney Baby Finale 2-in-1 Booster (BC220) product page (opens in a new tab)
Only in harness mode and only up to a child weight of 50 lb. Above 50 lb, the manual says to install with the vehicle belt plus tether, and LATCH is not used at all in booster mode.
Disney Baby Finale 2-in-1 Booster Car Seat user guide (PDF) (opens in a new tab)
It is certified for aircraft use with the internal harness, on forward-facing aircraft seats, installed without the tether steps. It is not certified as a booster, because aircraft seats do not have shoulder belts.
Disney Baby Finale 2-in-1 Booster Car Seat user guide (PDF) (opens in a new tab)
The manual says not to use it more than 10 years after the date of manufacture, which is on a label on the side of the seat. It must be replaced after a moderate to severe crash.
Disney Baby Finale 2-in-1 Booster Car Seat user guide (PDF) (opens in a new tab)
Safety 1st lists the same limits for the BC209: 40 to 65 lb and 43.4 to 49 in with the harness, and 40 to 100 lb and 43.4 to 52 in as a booster. The BC209 page also lists a removable Disney mouse ears head pillow.
Safety 1st Disney Baby Finale 2-in-1 Booster (BC209) product page (opens in a new tab)
Answers refer to the model and manual version on this page. Check the instructions supplied with your seat.
| Model | Top child weight | Seat weight | Width | Usable life |
|---|---|---|---|---|
| Disney Baby Finale 2-in-1 Booster Car Seat (BC220) (this seat) | 100 lb | — | — | 10 years |
| Grand 2-in-1 Booster Car Seat | 100 lb | — | — | — |
| Boost-and-Go Essential 3-in-1 Booster Car Seat | 100 lb | — | — | — |
| Comfort Ride 3-in-1 Booster Car Seat | 100 lb | — | — | 10 years |
| Disney Baby MagicSquad 3-in-1 Harness Booster Car Seat | 100 lb | — | — | 10 years |
| Disney Baby Finale 2-in-1 Booster Car Seat (BC209) | 100 lb | — | — | 10 years |
| Grow and Go 2-in-1 Belt-Positioning Booster Car Seat featuring ComfortWings | 100 lb | — | — | 10 years |
| Store 'n Go Sport Booster Car Seat | 100 lb | — | — | 10 years |
| Disney Baby Pronto! Belt-Positioning Booster Car Seat | 100 lb | — | — | 10 years |
| Comfort Ride Lite Booster Car Seat | 100 lb | — | — | — |
| Disney Baby Rise LX Booster Car Seat | 100 lb | — | — | 10 years |
Other harness-to-booster seats whose published weight and height limits overlap the Disney Baby Finale 2-in-1 Booster Car Seat (BC220).
| Mode | Weight | Height |
|---|---|---|
| Forward-facing harness booster | 40–65 lb | 43.4–49 in |
| Belt-positioning booster (high-back) | 40–100 lb | 43.4–52 in |
$79.99Price on safety1st.com as of 2026-10-07 05:49 UTC, subject to change
| Mode | Weight | Height |
|---|---|---|
| Forward-facing harness | 40–65 lb | 43.4–49 in |
| Belt-positioning booster (high-back) | 40–100 lb | 43.4–52 in |
$49.97Price on coscokids.com as of 2026-10-07 05:43 UTC, subject to change
| Mode | Weight | Height |
|---|---|---|
| Forward-facing harness | 40–65 lb | 43.4–49 in |
| Belt-positioning booster (high-back) | 40–100 lb | 43.4–52 in |
$74.98Rainbow · Amazon price as of 2026-11-01 12:09 UTC, subject to change
| Mode | Weight | Height |
|---|---|---|
| Forward-facing harness booster | 30–65 lb | 34.4–49 in |
| Belt-positioning booster (high-back) | 40–100 lb | 43.4–57 in |
| Backless booster | 40–100 lb | 43.4–57 in |
