CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
Safety 1st Grow and Go Extend 'n Ride LX All-in-One Convertible Car Seat
$209.99
Price on Amazon.com as of 2026-11-01 16:25 UTC, and subject to change.
An all-in-one car seat with 3 modes: rear-facing harness 5 to 40 lb, 19 to 40 in; forward-facing harness 30 to 65 lb, 34.4 to 49 in; belt-positioning booster (high-back) 40 to 100 lb, 43.4 to 52 in.
Specifications checked against Safety 1st’s US site and manual on . Not hands-on tested. How I research
Who is the Grow and Go Extend 'n Ride LX All-in-One Convertible Car Seat for?
The Grow and Go Extend 'n Ride LX (CC412) is an all-in-one seat: rear-facing 5 to 40 lb and 19 to 40 in., forward-facing 30 to 65 lb and 34.4 to 49 in., and a booster 40 to 100 lb and 43.4 to 52 in. Its footrest adds up to 7 in. of rear-facing legroom. It expires after 10 years.
Reasons to consider it
ComfortPlus footrest works in all 3 modes and adds up to 7 in. of rear-facing legroom
QuickFit harness and one-hand headrest adjustment
Lower anchors allowed forward-facing up to 50 lb
Two dishwasher-safe cup holders, one of which fits a two-handle sippy cup
Things to weigh up
The footrest goes on only after the seat is installed
Forward-facing and in booster mode, the child's knees must not pass the top of the cup holders or snack tray
Certified for aircraft only with the internal harness, not as a booster
No width or seat weight is published
My take on the Grow and Go Extend 'n Ride LX All-in-One Convertible Car Seat
It suits a child who will ride rear-facing for a long time and a parent who wants somewhere for the legs to go. The trade-off is setup: the footrest is rotated out of the way, the seat is installed, and only then is the footrest set. The standard Grow and Go (CC409) lists the same ranges, and its page does not describe a footrest.
A research summary of Safety 1st’s published specifications and manual, read . Not a hands-on test or a crash-safety rating.
Who the Grow and Go Extend 'n Ride LX All-in-One Convertible Car Seat fits
This seat covers 3 stages, and a child has to meet every limit of the stage they are in. Safety 1st gives it a 10-year life from the date of manufacture, so check the date label before using a hand-me-down.
Rear-facing harness5 to 40 lb · 19 to 40 in
The child faces the back of the car, which keeps the head, neck and spine supported in a frontal crash. Keep this mode as long as the child fits it.
Forward-facing harness30 to 65 lb · 34.4 to 49 in
The child faces forward in the seat’s own harness. Use the top tether every time, and stay in the harness until the child outgrows it.
Belt-positioning booster (high-back)40 to 100 lb · 43.4 to 52 in
The seat’s own back and belt guide route the vehicle belt across the shoulder, and the sides give the child something to lean on when they sleep.
What are the Grow and Go Extend 'n Ride LX All-in-One Convertible Car Seat weight, height and age limits?
Safety 1st Grow and Go Extend 'n Ride LX All-in-One Convertible Car Seat limits by mode
Mode
Child weight
Child height
Minimum age
Conditions
Rear-facing harness
5 to 40 lb
19 to 40 in
Not published
—
Forward-facing harness
30 to 65 lb
34.4 to 49 in
Not published
—
Belt-positioning booster (high-back)
40 to 100 lb
43.4 to 52 in
Not published
—
A child must meet every limit for the mode they use. The labels on your seat and its manual are the final word.
Grow and Go Extend 'n Ride LX All-in-One Convertible Car Seat specifications
Seat weight
Not published
Width
Not published
Usable life
10 years
Aircraft use
Certified for aircraft (see manual for which modes)
Recline positions
3
Rear-facing extra legroom
7 in
How the Grow and Go Extend 'n Ride LX All-in-One Convertible Car Seat installs
Recline
3 recline positions. The recline angle is what keeps a young baby’s airway open, so set it before tightening the install.
Harness
QuickFit no-rethread headrest/harness. Check the harness height at each growth spurt: at or below the shoulders rear-facing, at or above them forward-facing.
Every install is a fit between one seat and one vehicle. Read both manuals, and use a free inspection station if anything is unclear.
Will it fit your car?
Safety 1st does not publish a width for this seat, so measure your back seat and compare it with the seat in a store before buying.
Check your vehicle manual for lower anchor positions and any head-restraint rules.
Rear-facing seats need front-seat room: try the install behind the driver before you commit.
Certified for aircraft use, so it can travel as a seat rather than checked baggage.
What features does the Grow and Go Extend 'n Ride LX All-in-One Convertible Car Seat have?
QuickFit no-rethread headrest/harness
ComfortPlus footrest (up to 7 in extra rear-facing legroom)
3 recline positions
Colors listed in the US
Black Pepper, Winehouse.
Grow and Go Extend 'n Ride LX All-in-One Convertible Car Seat colors and prices
2 colors are listed on Amazon right now. Every color is the same price today. The fabric is the only difference between them; the shell, harness and limits are identical. Prices were retrieved Nov 1, 4:25 PM UTC and can change.
Compare Grow and Go Extend 'n Ride LX All-in-One Convertible Car Seat colors side by side
Prices and availability shown are accurate as of the time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply. As an Amazon Associate I earn from qualifying purchases.
What to know before you live with it
Setting the footrest in each mode
The manual says to rotate the footrest out of the way, install the seat, then adjust the footrest. Rear-facing, use one of the 3 rear-facing footrest positions to put it as flush against the vehicle seat as possible; a small gap is allowed. Forward-facing and in booster mode, choose the footrest arm and footrest position that best fit the child, or put it in the storage position. In booster mode the manual uses arm positions 2 or 3. One set of rotation buttons moves the arm (positions 1, 2 and 3) and another moves the footrest (positions A, B, C). In those two modes the child's knees must not pass the top of the cup holders or snack tray.
The seat has 3 recline positions. Rear-facing uses Position 3 or 2, never Position 1. For a child 5 to 30 lb and 19 to 34.3 in., the bottom level line must be parallel with the ground. For a child 30 to 40 lb and 34.4 to 40 in. who can sit up unassisted, the top level line must be parallel instead. The car seat base must be flat on the vehicle seat, and behind a front seat it must touch that seat back or be as close as possible. Forward-facing and booster modes use Position 1, fully upright.
Forward-facing, the manual says not to use the lower anchors for a child weighing more than 50 lb; the vehicle belt is required from there to 65 lb, and the tether must be attached whenever an anchor is available. In booster mode the harness is stored, the lower anchor belt and tether stay on their storage attachments, and only the vehicle lap and shoulder belt holds the child. The seat is certified for aircraft only with the internal harness, not as a booster, and must not be used more than 10 years after the date of manufacture.
The head and body pillows are optional, for rear-facing only, and must be used together. If you use the lower shoulder harness slots for a smaller infant, the manual sends you to a separate set of steps. The pad comes off without removing the harness. Machine wash it separately in cold water on a gentle cycle with the harness cover fastening strips closed and no bleach, then tumble dry separately for 10 to 12 minutes on low heat. Spot clean the harness straps with warm sudsy water and check them often for wear.
Is the Grow and Go Extend 'n Ride LX All-in-One Convertible Car Seat recalled?
25C006000: does not cover this model. Campaign 25C-006 covers only the Grow and Go Sprint model CC321 (CC321GYU, CC321GYUD, CC321GYY, CC321GYYD, CC321HAO, CC321HAR) built February 28 to December 31, 2023. This Grow and Go Extend 'n Ride LX is model CC412, which is not in that population. Dorel's report states that other Grow and Go and Grow and Go Sprint seats with different model numbers use different headrest foam designs, assembly processes and/or soft goods and are not included in the recall population. Campaign source (read ).
Each campaign naming this family was read against this model’s numbers and build dates, and none covers it. Still check your seat’s model number and date of manufacture before use, especially on a used seat.
Grow and Go Extend 'n Ride LX All-in-One Convertible Car Seat: common questions
What are the Grow and Go Extend 'n Ride LX limits?
The manual lists 5 to 40 lb and 19 to 40 in. rear-facing, 30 to 65 lb and 34.4 to 49 in. forward-facing with the harness, and 40 to 100 lb and 43.4 to 52 in. as a booster.
How much legroom does the Extend 'n Ride footrest add?
Safety 1st says the ComfortPlus footrest provides up to 7 in. of additional legroom in rear-facing mode. It also works forward-facing and as a footrest or step in booster mode.
When do I stop using LATCH on the Extend 'n Ride LX?
The manual says not to use the lower anchors for a child weighing more than 50 lb. Above that, install with the vehicle belt and the tether, up to the 65 lb harness limit.
The manual says it is certified for aircraft use with the internal harness. It is not certified as a booster, because aircraft seats have no shoulder belts.
The Grow and Go (CC409) page lists the same ranges: 5 to 40 lb and 19 to 40 in. rear-facing, 30 to 65 lb and 34.4 to 49 in. forward-facing, and 40 to 100 lb and 43.4 to 52 in. as a booster. Its page does not describe a footrest.
Answers refer to the model and manual version on this page. Check the instructions supplied with your seat.
Before you buy
Weigh and measure your child. The limits above are the manufacturer’s, and a child has to meet all of them for the mode they will use.
Confirm the exact version. Colors, retail exclusives and model numbers change limits more often than you would expect; Safety 1st lists 2 colors of this seat.
Read the manual before you buy, not after. It is linked above and holds the fit rules, the install methods and the expiry.
Check recalls by model number and date of manufacture, and register the seat with Safety 1st so you hear about the next one.