Graco SlimFit3 LX 3-in-1 Car Seat

$299.99

Price on Amazon.com as of 2026-11-02 05:03 UTC, and subject to change.

An all-in-one car seat with 3 modes: rear-facing harness 5 to 40 lb; forward-facing harness 26.5 to 65 lb, up to 49 in; high-back booster 40 to 100 lb, 43 to 57 in.

At a glance

  • Fits children from 5 to 100 lb
  • Up to 57 in tall
  • 3 modes: rear-facing harness, forward-facing harness, high-back booster
  • Seat weighs 19.2 lb
  • 16.7 in wide
  • 10-year usable life
Check the current price

Opens Amazon.com in a new tab. As an Amazon Associate I earn from qualifying purchases.

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Specifications checked against Graco’s US site and manual on . Not hands-on tested. How I research

Who is the SlimFit3 LX 3-in-1 Car Seat for?

The Graco SlimFit3 LX is a 3-in-1 seat Graco lists at 16.7 in wide. It is used rear-facing from 5 to 40 lb, forward-facing with the harness from 26.5 to 65 lb, and as a high-back booster from 40 to 100 lb for children 43 to 57 in tall. It has no backless mode and expires after 10 years.

Reasons to consider it

  • Graco lists it at 16.7 in wide, with a three-across chapter in the manual
  • A lock-off on forward-facing belt installs, so no retractor switching
  • Optional cup holders that are top-rack dishwasher safe
  • Certified for aircraft with the internal harness

Things to weigh up

  • No backless booster mode; the high-back booster ends at 100 lb
  • Starts at 5 lb rear-facing
  • Two recline positions in each harness direction
  • LATCH in booster mode needs the tether as well

My take on the SlimFit3 LX 3-in-1 Car Seat

It suits a family fitting three seats across a back row, or using a narrow car. The manual has a chapter on three-across installs, and Graco lists the seat at 16.7 in wide and 19.2 lb. The trade-off against the 4Ever DLX is no backless booster mode and fewer recline positions, 4 against 6, with Graco listing the DLX at 21.5 in wide.

A research summary of Graco’s published specifications and manual, read . Not a hands-on test or a crash-safety rating.

Who the SlimFit3 LX 3-in-1 Car Seat fits

This seat covers 3 stages, and a child has to meet every limit of the stage they are in. Graco gives it a 10-year life from the date of manufacture, so check the date label before using a hand-me-down.

Rear-facing harness5 to 40 lb
The child faces the back of the car, which keeps the head, neck and spine supported in a frontal crash. Keep this mode as long as the child fits it.
Forward-facing harness26.5 to 65 lb · Up to 49 in
The child faces forward in the seat’s own harness. Use the top tether every time, and stay in the harness until the child outgrows it.
High-back booster40 to 100 lb · 43 to 57 in · from 4 years
The seat’s own back and belt guide route the vehicle belt across the shoulder, and the sides give the child something to lean on when they sleep.

What are the SlimFit3 LX 3-in-1 Car Seat weight, height and age limits?

Graco SlimFit3 LX 3-in-1 Car Seat limits by mode
ModeChild weightChild heightMinimum ageConditions
Rear-facing harness5 to 40 lbNot publishedNot publishedHead must be at least 1 in below the headrest adjustment handle
Forward-facing harness26.5 to 65 lbUp to 49 inNot published—
High-back booster40 to 100 lb43 to 57 in4 yearsAt least 4 years old

A child must meet every limit for the mode they use. The labels on your seat and its manual are the final word.

SlimFit3 LX 3-in-1 Car Seat specifications

Seat weight
19.2 lb
Width
16.7 in
Depth
20.7 in
Height
24.5 in
Usable life
10 years
Aircraft use
Not published
Headrest positions
10
Recline positions
4

How the SlimFit3 LX 3-in-1 Car Seat installs

Belt lock-off
Integrated belt lock-off (forward-facing). A lock-off clamps the vehicle belt so you do not have to switch the belt's retractor into its locked mode.
Lower anchors
InRight LATCH. Check your vehicle manual for which seating positions have anchors, and switch to the seat belt once the child passes the anchor weight limit in the manual.
Recline
4 recline positions. The recline angle is what keeps a young baby’s airway open, so set it before tightening the install.
Harness
10-position no-rethread harness. Check the harness height at each growth spurt: at or below the shoulders rear-facing, at or above them forward-facing.

Every install is a fit between one seat and one vehicle. Read both manuals, and use a free inspection station if anything is unclear.

An empty car seat installed on a back seat, seen through an open car door

Will it fit your car?

At 16.7 in at its widest, this seat is one of the narrower ones in its class and is a candidate for three across in many mid-size cars. It weighs 19.2 lb, which matters if you will move it between cars or carry it through an airport.

  • Check your vehicle manual for lower anchor positions and any head-restraint rules.
  • Rear-facing seats need front-seat room: try the install behind the driver before you commit.
  • Aircraft certification is printed on the seat’s own label; check before you fly.

What features does the SlimFit3 LX 3-in-1 Car Seat have?

  • InRight LATCH
  • Integrated belt lock-off (forward-facing)
  • 10-position no-rethread harness
  • 4 recline positions
  • 16.7 in wide

Colors listed in the US

Katrina, Kunningham.

SlimFit3 LX 3-in-1 Car Seat colors and prices

2 colors are listed on Amazon right now. Every color is the same price today. The fabric is the only difference between them; the shell, harness and limits are identical. Prices were retrieved Nov 2, 5:03 AM UTC and can change.

Compare SlimFit3 LX 3-in-1 Car Seat colors side by side
Compare colorsKunningham 2.0Check priceKatrina 2.0Check price
Price$299.99$299.99
AvailabilityIn stockIn stock
Price checkedNov 2, 5:03 AM UTCNov 2, 3:58 AM UTC

Prices and availability shown are accurate as of the time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply. As an Amazon Associate I earn from qualifying purchases.

What to know before you live with it

Fitting three across

The manual recommends the vehicle belt over the lower anchors for three-across, since lower anchors fix the seat in one place and many vehicles lack them in all three positions. It suggests buckling all three belts first to judge the fit, installing the center seat first, and putting the rear-facing seat in the center. If cup holders get in the way, remove one. Seats can touch but should not overlap, and each should move less than 1 in at the belt path. An infant carrier next to it must be attached to its base at all four points each time.

Source: Graco SlimFit3 LX 3-in-1 manual (PDF)

Installation and recline

Rear-facing uses one of two rear-facing recline positions and forward-facing one of two forward-facing positions. The booster goes in the 4th position. Lower anchor connectors fit vehicles with 11 in (28 cm) anchor spacing, and LATCH is not used forward-facing for a child over 45 lb. For a forward-facing belt install, the lap and shoulder belt both go under the lock-off, and the manual says you then do not need to switch the retractor. In booster mode, LATCH is allowed only if the vehicle maker permits it, and the tether must then be used.

Source: Graco SlimFit3 LX 3-in-1 manual (PDF)

Harness, supports and cleaning

Rear-facing, the top of the head must be at least 1 in below the headrest adjustment lever. Forward-facing, the straps sit at or just above the shoulders and the ears stay below the top of the headrest. The head and body supports are for children under 20 lb, rear-facing only. The headrest pad unsnaps from the shell, and the seat pad uses 6 snaps. Pads machine wash cold on a delicate cycle and drip-dry, with no bleach. Cup holders must come off before the front seat pad.

Source: Graco SlimFit3 LX 3-in-1 manual (PDF)

Is the SlimFit3 LX 3-in-1 Car Seat recalled?

No campaign in the current NHTSA child-restraint data names this model family, and I have not run a separate review for it. Check your seat’s model number and date of manufacture before use.

NHTSA recall search · Recent car seat recalls

SlimFit3 LX 3-in-1 Car Seat: common questions

What are the SlimFit3 LX weight limits?

Rear-facing is 5 to 40 lb, forward-facing with the harness 26.5 to 65 lb, and high-back booster 40 to 100 lb for a child at least 4 years old and 43 to 57 in tall.

Graco SlimFit3 LX 3-in-1 manual (PDF) (opens in a new tab)

Does the SlimFit3 LX have a backless booster mode?

No. The manual describes rear-facing, forward-facing and a high-back booster only. The booster ends at 100 lb.

Graco SlimFit3 LX 3-in-1 manual (PDF) (opens in a new tab)

How wide is the SlimFit3 LX?

Graco lists it at 16.7 in wide, 20.7 in deep and 24.5 in tall, with a product weight of 19.2 lb.

Graco SlimFit3 LX 3-in-1 product page (opens in a new tab)

How does it compare with the 4Ever DLX?

Graco lists the 4Ever DLX at 21.5 in wide and 23 lb, with four modes including a backless booster to 120 lb and 6 recline positions.

Graco 4Ever DLX 4-in-1 product page (opens in a new tab)

Can I use the SlimFit3 LX on a plane?

Yes, but only with the internal harness, on a forward-facing aircraft seat and without the tether. It is not certified for aircraft as a booster.

Graco SlimFit3 LX 3-in-1 manual (PDF) (opens in a new tab)

When does the SlimFit3 LX expire?

Graco says to stop using it and throw it away 10 years after the date of manufacture.

Graco SlimFit3 LX 3-in-1 manual (PDF) (opens in a new tab)

Answers refer to the model and manual version on this page. Check the instructions supplied with your seat.

Before you buy

  1. Weigh and measure your child. The limits above are the manufacturer’s, and a child has to meet all of them for the mode they will use.
  2. Confirm the exact version. Colors, retail exclusives and model numbers change limits more often than you would expect; Graco lists 2 colors of this seat.
  3. Read the manual before you buy, not after. It is linked above and holds the fit rules, the install methods and the expiry.
  4. Check recalls by model number and date of manufacture, and register the seat with Graco so you hear about the next one.

Sources

Other Graco convertible car seats

ModelTop child weightSeat weightWidthUsable life
SlimFit3 LX 3-in-1 Car Seat (this seat)100 lb19.2 lb16.7 in10 years
Extend2Fit Convertible Car Seat65 lb19 lb19.5 in10 years
Contender Slim Convertible Car Seat65 lb16 lb18.9 in7 years
Extend2Fit 3-in-1 Car Seat100 lb20.61 lb19 in10 years
Extend2Fit 3-in-1 Car Seat featuring Anti-Rebound Bar100 lb21.9 lb19 in10 years
4Ever DLX 4-in-1 Car Seat120 lb23 lb21.5 in10 years
4Ever DLX Slim 4-in-1 Car Seat120 lb27.5 lb18.9 in10 years
4Ever DLX Grad 5-in-1 Slim Car Seat120 lb24.1 lb18 in10 years
4Ever 4-in-1 Convertible Car Seat featuring TrueShield Technology120 lb24 lb21.5 in10 years
4Ever Extend2Fit 4-in-1 Car Seat120 lb25.99 lb21.5 in10 years
Grows4Me 4-in-1 Car Seat110 lb22.5 lb21.5 in10 years
SlimFit 3-in-1 Car Seat100 lb19.47 lb19.9 in10 years
SlimFit LX 3-in-1 Car Seat100 lb21.5 lb19.9 in10 years
TriRide 3-in-1 Car Seat100 lb18.45 lb19 in10 years
TrioGrow SnugLock 3-in-1 Car Seat100 lb18.92 lb19 in10 years